Dell Studio 1555 / 1557 / 1558 LCD Display Assembly Removal and Installation

Created by Roscoe Dyer on August 9, 2011

In this Dell laptop tutorial we are going to show you how to install and replace the LCD Display Assembly on your Dell Studio 1555 / 1557 / 1558 laptop. These installation instructions have be made into 11 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell Studio 1555 / 1557 / 1558 LCD Display Assembly.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

1 x small phillips head screw driver
1 x small plastic scribe

Studio 1558 Screen

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!

Use this coupon code to save 5% off these parts

DIYM514

Studio 1558 Screen

Video tutorial repair manual

Installation and Removal Instructions
Dell Studio 1555 / 1557 / 1558 LCD Display Assembly

Step 1

Slide the battery latch to the right.
Slide the battery out of the laptop.

Lift the door away from the laptop base.

Step 2

Unscrew the 3 retaining screws on the Access Door.
Lift the door away from the laptop base.

Unplug the antenna cables and loosen them from their routing channels.

Step 3

Unplug the antenna cables and loosen them from their routing channels.

Unscrew the (2) 2.5mm x 5mm bottom hinge screws.

Step 4

Unscrew the (2) 2.5mm x 5mm bottom hinge screws.

Remove the 2mm x 3mm screw under the battery.

Step 5

Remove the 2mm x 3mm screw under the battery.

Unsnap the media control cover from the palm rest starting at the back near to the screen.

Step 6

Unsnap the media control cover from the palm rest starting at the back near to the screen.

Unscrew the (2) 2mm x 3mm screws for the keyboard.

Step 7

Unscrew the (2) 2mm x 3mm screws for the keyboard.

Carefully lift the keyboard away form the base and turn it over. If you pull it to hard you risk breaking the keyboard cable connector on the motherboard.

Step 8

Carefully lift the keyboard away form the base and turn it over. If you pull it to hard you risk breaking the keyboard cable connector on the motherboard.

Pivot the keyboard cable latch and the back light cable latch up and unplug the cables.

Step 9

Pivot the keyboard cable latch and the back light cable latch up and unplug the cables.

Pull the antenna cables through the base and loosen all of the cables from their routing channels.

Step 10

disconnect the LCD display cable and the power button cable.
Pull the antenna cables through the base and loosen all of the cables from their routing channels.