In this Dell laptop tutorial we are going to show you how to install and replace the CPU Processor on your Dell Latitude E6400 laptop. These installation instructions have be made into 6 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell Latitude E6400 CPU Processor.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screw driver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Dell Latitude E6400 CPU Processor
Step 1
- Slide the battery latches over and slide the battery up.
Step 2
- Loosen the access panel door cover screw.
- Remove the (2) 3mm x 3mm hard drive screws.
Step 3
- Slide the door down and lift it off of the laptop.
Step 4
- Unplug the fan.
- Loosen the 4 heat sink screws.
Step 5
- Using a flat head screw driver, turn the CPU locking screw counterclockwise to unlock the CPU.
Step 6
- Installation note 1: Make sure to replace thermal compound or thermal pads on the CPU and heatsink.
- Installation note 2: Tighten the heatsink screws in the order listed on the heatsink.
- **This image is used only as an example.**
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|