In this Dell laptop tutorial we are going to show you how to install and replace the LCD Display Assembly on your Dell Latitude E6400 laptop. These installation instructions have be made into 6 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell Latitude E6400 LCD Display Assembly.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screw driver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Dell Latitude E6400 LCD Display Assembly
Step 1
- Slide the battery latches over and slide the battery up.
Step 2
- Loosen the access panel door cover screw.
- Remove the (2) 3mm x 3mm hard drive screws.
Step 3
- Slide the door down and lift it off of the laptop.
Step 4
- Unscrew the (2) 2.5mm x 5mm screws on the left and right hinge covers.
- Slide the hinge covers up and lift them off of the laptop base.
Step 5
- Loosen the antenna cables and disconnect the LCD cable.
Step 6
- Unscrew the (2) 2.5mm x x5mm hinge screws.
- Turn the laptop over, open the LCD, and lift it off of the base.
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|