Dell Inspiron 6400 E1505 LCD Back Assembly Removal and Installation

Created by Roscoe Dyer on January 4, 2012

In this Dell laptop tutorial we are going to show you how to install and replace the LCD Back Assembly on your Dell Inspiron 6400 / E1505 laptop. These installation instructions have be made into 10 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell Inspiron 6400 / E1505 LCD Back Assembly.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

1 x small phillips head screw driver
1 x small plastic scribe

Inspiron E1505 LCD Back Cover

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!

Use this coupon code to save 5% off these parts

DIYM514

Inspiron E1505 LCD Back Cover

Video tutorial repair manual

Installation and Removal Instructions
Dell Inspiron 6400 / E1505 LCD Back Assembly

On the bottom of the laptop, slide the battery latch to the right and lift the battery out.

Step 1

On the bottom of the laptop, slide the battery latch to the right and lift the battery out.

On the back of the laptop remove the (2) 2.5mm x 8mm Hinge screws.

Step 2

On the bottom of the laptop remove the (2) 2.5mm x 8mm hinge screws.
On the back of the laptop remove the (2) 2.5mm x 8mm Hinge screws.

On the right side of the power button, place a flat head screw driver into the slot and carefully pry up the power button cover.

Step 3

Open the laptop display as far as possible.
On the right side of the power button, place a flat head screw driver into the slot and carefully pry up the power button cover.

Carefully lift the keyboard up and place it onto the LCD screen to reveal the keyboard cable connection.

Step 4

Remove the (2) 2.5mm x 5mm screws.
Carefully lift the keyboard up and place it onto the LCD screen to reveal the keyboard cable connection.

Pivot the keyboard cable latch up and remove the cable.

Step 5

Pivot the keyboard cable latch up and remove the cable.

Step 6

Unplug the wireless antenna cables.

Step 7

Loosen the LCD cable ground screw.
Unplug the LCD cable.

Remove the (2) 2.5mm x 5mm hinge screws.

Step 8

Loosen the LCD cable and antenna wires from the routing channels.
Remove the (2) 2.5mm x 5mm hinge screws.
Lift the display assembly from the laptop base.

Remove the (6) 2.5mm x 4.5mm x 1.5mm screws.

Step 9

Remove the 6 rubber screw covers.
Remove the (6) 2.5mm x 4.5mm x 1.5mm screws.
Starting at the bottom, unsnap the bezel, working your way around the edge of the screen.