Dell XPS 15z L511z LCD Hinge Removal and Installation

Created by on August 7, 2012
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the LCD Hinge on your Dell XPS 15z L511z laptop. These installation instructions have be made into 21 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell XPS 15z L511z LCD Hinge.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screwdriver
  • 1 x T5 star screwdriver
  • 1 x small plastic scribe
XPS L511z Hinge

Dell Laptop Replacement Parts Needed

8R78P Image
Eligible for $5.00 Economy Shipping.
Only 19 left in stock - order soon.
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
XPS 15z L511z Hinge

Video tutorial repair manual



Installation and Removal Instructions
Dell XPS 15z L511z LCD Hinge

Remove the SD card blank.

Step 1

  • Remove the SD card blank.
  • Use a scribe or a flat head screwdriver to carefully unsnap the bezel.
Remove the SD card blank.Use a scribe or a flat head screwdriver to carefully unsnap the bezel.
Remove the screws under the bezel (2 x M2 x 5mm).

Step 2

  • Remove the screws under the bezel (2 x M2 x 5mm).
  • Remove the base screws (8 x M2 x 5mm).
  • Carefully lift and unsnap the base cover from the laptop.
Remove the screws under the bezel (2 x M2 x 5mm).Remove the base screws (8 x M2 x 5mm).
Remove the battery screws.

Step 3

  • Remove the battery screws (6 x M2.5 x 5mm).
  • Unplug the battery.
Remove the battery screws.Unplug the battery.
Loosen the heatsink screws (cannot be removed).

Step 4

  • Loosen the heatsink screws (cannot be removed).
  • Remove the heatsink.
Installation note 1: Make sure to replace thermal compound or thermal pads on the CPU and heatsink.

Step 5

  • Installation note 1: Make sure to replace thermal compound or thermal pads on the CPU and heatsink.
  • Installation note 2: Tighten the heatsink screws in the order listed on the heatsink.
  • **This image is used only as an example.**
Unplug the fan.

Step 6

  • Unplug the fan.
  • Remove the fan screws (2 x M2.5 x 5mm).
  • Remove the fan from the laptop.
Unplug the fan.Remove the fan screws (2 x M2.5 x 5mm).
Loosen and unplug the CMOS battery.

Step 7

  • Loosen and unplug the CMOS battery.
Remove the optical drive screws.

Step 8

  • Remove the optical drive screws (4 x M2.5 x 3mm).
  • Slide the optical drive to the left and out of the laptop.
Separate the memory clips and remove the memory.

Step 9

  • Separate the memory clips and remove the memory.
  • Repeat the process for the second memory stick.
Separate the memory clips and remove the memory.Repeat the process for the second memory stick.
Unplug the antenna cables.

Step 10

  • Unplug the antenna cables.
  • Remove the WLAN card screw (1 x M2 x 3mm).
Unplug the antenna cables.Remove the WLAN card screw (1 x M2 x 3mm).
Unplug the DC jack.

Step 11

  • Unplug the DC jack.
  • Remove the DC jack screw (1 x M2 x 3mm).
  • Remove the DC jack.
Unplug the DC jack.Remove the DC jack screw (1 x M2 x 3mm).
Carefully peel back the tape that is over the keyboard cable.

Step 12

  • Carefully peel back the tape that is over the keyboard cable.
  • Unplug the LCD cable.
Carefully peel back the tape that is over the keyboard cable.Unplug the LCD cable.
Unplug the 6 motherboard cables.

Step 13

  • Unplug the 6 motherboard cables.
  • Carefully lift the motherboard away from the laptop and turn it over.
Unplug the bottom motherboard cables.

Step 14

  • Unplug the bottom motherboard cables.
Remove the bottom hinge screws (4 x M2.5 x 5mm).

Step 15

Remove the back hinge screws (2 x M2.5 x 5mm).

Step 16

  • Remove the back hinge screws (2 x M2.5 x 5mm).
  • Carefully separate the LCD display assembly and slide the cables through the palmrest.
Using a scribe, carefully pry up the front bezel. The front bezel is glued to the bottom bezel and be bent very easily.

Step 17

  • Using a scribe, carefully pry up the front bezel. The front bezel is glued to the bottom bezel and be bent very easily.
Remove the bezel screws (4 x M2 x 3mm).

Step 18

  • Remove the bezel screws (4 x M2 x 3mm).
  • Unsnap the bezel from the back assembly.
Remove the bezel screws (4 x M2 x 3mm).Unsnap the bezel from the back assembly.
Remove the LCD screen screws (4 x M2 x 3mm).

Step 19

  • Remove the LCD screen screws (4 x M2 x 3mm).
  • Carefully lift the screen out and turn it over.
Unplug the LCD cable.

Step 20

  • Unplug the LCD cable.
Remove the left and right hinge screws (8 x M2.5 x 3mm) ---2.5x3.

Step 21

  • Remove the left and right hinge screws (8 x M2.5 x 3mm).
  • Remove the hinges.
XPS L511z Hinge

Dell Laptop Replacement Parts Needed

8R78P Image
Eligible for $5.00 Economy Shipping.
Only 19 left in stock - order soon.
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
XPS 15z L511z Hinge

Topics: Dell Laptop Repair Dell Repair Manuals Hinge XPS 15z (L511z)

Tags

Join the conversation!

2 Responses to Dell XPS 15z L511z LCD Hinge Removal and Installation

  1. Pingback: Dell XPS 15z L511z Web Camera & Cable Removal and Installation

  2. Pingback: Dell XPS 15z L511z LCD Cable Removal and Installation

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.