In this Dell laptop tutorial we are going to show you how to install and replace the Palmrest Chassis Bracket on your XPS 17-L702X (P09E002) laptop. These installation instructions have be made into 27 easy to follow printable steps. We have also create a video tutorial that shows you how to install your XPS 17-L702X (P09E002) Palmrest Chassis Bracket.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
XPS 17-L702X (P09E002) Palmrest Chassis Bracket
Step 6
- Remove the 3 screws under the optical drive.
- Press the plastic retainer in the optical drive bay.
Step 7
- Remove the bottom display screws.
Step 8
- Remove the screws at the top of the base.
- Remove the screws under the battery.
- Remove the screws under the access door.
Step 9
- Remove the SD card blank.
Step 10
- Turn the laptop over and open it up.
- Unsnap the palmrest and turn it over.
- Unplug the palmrest cables.
- Remove the Palmrest Touchpad.
Step 11
- Lift the keyboard up and turn it over.
- Unplug the keyboard cables.
- Remove the Keyboard.
Step 13
- Loosen the display cable screw.
- Unplug the display cable.
Step 14
- Remove the left hinge screws.
- Remove the right hinge screws.
- Remove the LCD Display Assembly.
Step 15
- Remove the screws under the palmrest.
Step 20
- Installation note 1: Make sure to replace thermal compound or thermal pads on the CPU and heatsink.
- Installation note 2: Tighten the heatsink screws in the order listed on the heatsink.
Step 22
- Turn the base over and unplug the USB cable.
- Unplug the speaker cable.
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|