In this Dell laptop tutorial we are going to show you how to install and replace the Hall Sensor on your Latitude E6220 laptop. These installation instructions have be made into 11 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude E6220 Hall Sensor.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
Latitude E6220 Hall Sensor
Latitude E6220 Hall Sensor
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Latitude E6220 Hall Sensor
Step 1
- Slide the latches over.
- Remove the battery.
Step 2
- Press the SD card in to eject it.
- Remove the SD card.
Step 3
- Loosen the screw (cannot be removed).
- Remove the door.
Step 4
- Remove the screws.
- Using the pull tab, lift the hard drive out of the laptop.
Step 5
- Unplug the bluetooth cable.
Step 7
- Unplug the speaker cable.
- Loosen the screws (cannot be removed).
Step 8
- Loosen the speakers.
- Remove speakers and cables.
Step 9
- Unplug and loosen the hall sensor cable.
- Unplug the motherboard cables.
Step 10
- Remove the screws.(5 x M2.5 x 3mm)(3 x M2.5 x 5mm)(3 x M2.5 x 8mm)(2 x M2 x 5mm)
- Remove the bottom base chassis.
Latitude E6220 Hall Sensor
Latitude E6220 Hall Sensor
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|