In this Dell laptop tutorial we are going to show you how to install and replace the Bottom Base on your Inspiron 14R-N4010 (P11G-001) laptop. These installation instructions have be made into 19 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Inspiron 14R-N4010 (P11G-001) Bottom Base.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Inspiron 14R (N4010) Bottom Base
Step 1
- Slide the latches over to unlock the battery.
- Remove the battery.
Step 2
- Remove the screw.
- Slide the optical drive out of the laptop.
Step 3
- Loosen the screw.
- Remove the access door.
Step 4
- Remove the screws under the battery.
- Remove the middle hinge cover screws.
- Remove the screws under the optical drive.
Step 5
- Remove the bottom keyboard screws.
- Remove the palmrest screws.
- Turn the laptop over and open it up.
Step 6
- Press the keyboard latches in.
- Carefully lift the keyboard and turn it over.
- Unplug the cable and remove the keyboard.
Step 7
- Remove the tape over the palmrest cables.
- Unplug the palmrest cables.
- Remove the palmrest.
Step 8
- Unplug the antenna cables.
- Loosen the ground screw.
- Unplug the LCD cable.
Step 9
- Remove the right hinge screws.
- Remove the left hinge screws.
- Remove the LCD display assembly.
Step 10
- Carefully unsnap the middle hinge cover.
Step 11
- Unplug the cable.
- Remove the screws.
- Remove the circuit board.
Step 12
- Unplug the cable.
- Remove the screws.
- Remove the fan.
Step 13
- Remove the screw.
- Remove the bluetooth card.
Step 14
- Unplug the speakers.
- Unplug the DC jack.
Step 15
- Remove the motherboard screws.
- Remove the motherboard.
Step 16
- Remove the screws.
- Remove the circuit board.
Step 17
- Remove the screw.
- Remove the DC jack.
Step 18
- Remove the screws.
- Remove the speakers.
Step 19
- The remaining piece is the bottom base.
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|