In this Dell laptop tutorial we are going to show you how to install and replace the USB I/O SD Circuit Board on your Inspiron 17 (5748) laptop. These installation instructions have be made into 10 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Inspiron 17 (5748) USB I/O SD Circuit Board.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Inspiron 17 (5748) USB I/O SD Circuit Board
Step 1
- Slide the latches over to unlock the battery.
- Lift the battery out of the laptop.
Step 2
- Remove the screw.
- Slide the optical drive out of the laptop.
Step 3
- Remove the screws.
- Carefully pry up the access door.
Step 4
- Remove the screw.
- Slide the hard drive to the left and lift it out of the laptop.
Step 5
- Remove the bottom screws.
- Turn the laptop over and open it up.
Step 6
- Press in the keyboard latches and loosen the keyboard.
Step 7
- Turn the keyboard over.
- Unplug the keyboard cable.
Step 8
- Remove the top screws.
- Unplug the cables.
Step 9
- Carefully separate and remove the palmrest.
Step 10
- Unplug and loosen the cable.
- Remove the circuit board.
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|