In this Dell laptop tutorial we are going to show you how to install and replace the LCD Hinge on your Latitude E6410 laptop. These installation instructions have be made into 13 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude E6410 LCD Hinge.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
Latitude E6410 Hinge
Latitude E6410 LCD Hinge
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Latitude E6410 LCD Hinge
Step 1
- Slide the latches over and slide the battery out of the laptop.
Step 2
- Remove the screw.
- Press in to eject the latch.
Step 3
- Slide the optical drive out of the laptop.
Step 4
- Remove the hard drive screws.
- Slide the hard drive out of the laptop.
Step 5
- Loosen the screw.
- Slide the door down to remove it.
Step 6
- Remove the screws.
- Unsnap & remove the hinge covers.
Step 7
- Unplug and loosen the antenna cables.
Step 8
- Remove the LCD cable screws.
- Unplug & loosen the cable
Step 9
- Remove the bottom hinge screws.
- Remove the LCD display assembly.
Step 10
- Carefully unsnap the bezel around the edge of the screen.
Step 11
- Remove the screen screws,
Step 12
- Lift the screen & turn it over.
- Unplug the LCD cable.
Step 13
- Remove the hinge screws.
- Remove the hinges.
Latitude E6410 Hinge
Latitude E6410 LCD Hinge
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|