In this Dell laptop tutorial we are going to show you how to install and replace the Power Button on your Latitude E6410 laptop. These installation instructions have be made into 21 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude E6410 Power Button.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
Latitude E6410 Power Button Circuit Boar
Latitude E6410 Power Button Circuit Board
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Latitude E6410 Power Button
Step 1
- Slide the latches over and slide the battery out of the laptop.
Step 2
- Press in the SD card in to eject it.
Step 3
- Remove the screw.
- Press in to eject the latch.
Step 4
- Slide the optical drive out of the laptop.
Step 5
- Remove the hard drive screws.
- Slide the hard drive out of the laptop.
Step 6
- Loosen the screw.
- Slide the door down to remove it.
Step 7
- Unplug & remove the CMOS battery.
Step 8
- Unplug the cable.
- Loosen the screws.
- Remove the heatsink / fan.
Step 9
- Separate the clips & remove the memory.
Step 10
- Repeat the process for the second memory stick.
Step 11
- Unplug the antenna cables.
- Remove the screw.
- Remove the wireless card.
Step 12
- Unplug the antenna cables.
- Remove the screw.
- Remove the wireless card.
Step 13
- Remove the screws.
- Unsnap & remove the hinge covers.
Step 14
- Loosen the antenna cables.
Step 15
- Remove the LCD cable screws.
- Unplug & loosen the cable
Step 16
- Remove the bottom hinge screws.
- Remove the LCD display assembly.
Step 17
- Loosen the 2 bottom screws.
- Remove the bottom screws.
Step 18
- Turn the laptop over.
- Unsnap & remove the media cover.
Step 19
- Remove the screws.
- Slide the keyboard up and remove the keyboard.
Step 20
- Unplug the palmrest cables.
- Remove the screws.
- Unsnap and remove the palmrest.
Step 21
- Turn the palmrest over.
- Remove the screws.
- Remove the circuit board.
Latitude E6410 Power Button Circuit Boar
Latitude E6410 Power Button Circuit Board
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|