In this Dell laptop tutorial we are going to show you how to install and replace the Bottom Base on your Latitude E6410 laptop. These installation instructions have be made into 29 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude E6410 Bottom Base.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
Latitude E6410 Bottom Base
Latitude E6410 Bottom Base
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Latitude E6410 Bottom Base
Step 1
- Slide the latches over and slide the battery out of the laptop.
Step 2
- Press in the SD card in to eject it.
Step 3
- Remove the screw.
- Press in to eject the latch.
Step 4
- Slide the optical drive out of the laptop.
Step 5
- Remove the hard drive screws.
- Slide the hard drive out of the laptop.
Step 6
- Loosen the screw.
- Slide the door down to remove it.
Step 7
- Unplug & remove the CMOS battery.
Step 8
- Unplug the cable.
- Loosen the screws.
- Remove the heatsink / fan.
Step 9
- Separate the clips & remove the memory.
Step 10
- Repeat the process for the second memory stick.
Step 11
- Unplug the antenna cables.
- Remove the screw.
- Remove the wireless card.
Step 12
- Unplug the antenna cables.
- Remove the screw.
- Remove the wireless card.
Step 13
- Remove the screws.
- Unsnap & remove the hinge covers.
Step 14
- Loosen the antenna cables.
Step 15
- Remove the LCD cable screws.
- Unplug & loosen the cable
Step 16
- Unplug the DC jack cable.
Step 17
- Remove the bottom hinge screws.
- Remove the LCD display assembly.
Step 18
- Loosen the 2 bottom screws.
- Remove the bottom screws.
Step 19
- Turn the laptop over.
- Unsnap & remove the media cover.
Step 20
- Remove the screws.
- Slide the keyboard up and remove the keyboard.
Step 21
- Unplug the palmrest cables.
- Remove the screws.
- Unsnap and remove the palmrest.
Step 22
- Remove the screws.
- Remove the express card cage.
Step 23
- Remove the tape.
- Unplug the cable.
Step 24
- Remove the screws.
- Remove the FireWire port.
Step 25
- Unplug the motherboard cable.
- Remove the screws.
- Remove the motherboard.
Step 26
- Remove the DC jack.
Step 27
- Remove the tape.
- Remove the modem port.
Step 28
- Remove the screw.
- Remove the circuit board.
Step 29
- The remaining piece is the bottom base.
Latitude E6410 Bottom Base
Latitude E6410 Bottom Base
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|