Dell Latitude E5440 DC Jack Removal and Installation

Created by on September 22, 2014
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the DC Jack on your Latitude E5440 laptop. These installation instructions have be made into 12 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude E5440 DC Jack.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screwdriver
  • 1 x small plastic scribe
Latitude E5440 DC Jack

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude E5440 DC Jack

Video tutorial repair manual



Installation and Removal Instructions
Latitude E5440 DC Jack

Lift the battery out of the laptop.

Step 1

  • Slide the latches over.
  • Lift the battery out of the laptop.
Lift the battery out of the laptop.Slide the latches over.
Slide the optical drive out of the laptop.

Step 2

  • Remove the screw.
  • Slide the optical drive out of the laptop.
Slide the optical drive out of the laptop.Remove the screw.Remove the screw.
Remove the bottom base.

Step 3

  • Remove the screws.
  • Remove the bottom base.
  • Remove the bottom screws.
Remove the bottom base.Remove the bottom screws.Remove the screws.
Unplug the antenna cables.

Step 4

  • Unplug the antenna cables.
Turn the laptop over and open it up.

Step 5

  • Remove the back hinge cover screws.
  • Turn the laptop over and open it up.
  • Remove the keyboard trim bezel.
Turn the laptop over and open it up.Remove the keyboard trim bezel.
Lift the keyboard up and unplug the cable.

Step 6

  • Remove the screws.
  • Lift the keyboard up and unplug the cable.
  • Remove the keyboard.
Lift the keyboard up and unplug the cable.Remove the keyboard.Remove the screws.
Remove the hinge covers.

Step 7

  • Remove the hinge cover screws.
  • Remove the hinge covers.
Remove the hinge covers.Remove the hinge cover screws.
Remove the screws.

Step 8

  • Unplug the cables.
  • Remove the screws.
  • Unsnap & remove the palmrest.
Remove the screws.Unsnap & remove the palmrest.Unplug the cables.
Remove the cable bracket.

Step 9

  • Remove the bracket screws.
  • Remove the cable bracket.
  • Unplug and loosen the display cable.
Remove the cable bracket.Unplug and loosen the display cable.Remove the bracket screws.
Remove the display assembly.

Step 10

  • Remove the hinge screws.
  • Remove the display assembly.
Remove the display assembly.Remove the hinge screws.Remove the hinge screws.
Remove the screw.

Step 11

  • Unplug the cable.
  • Remove the screw.
  • Remove the circuit board.
Remove the screw.Remove the circuit board.Unplug the cable.
Remove the DC jack.

Step 12

  • Unplug the cable.
  • Remove the DC jack.
Remove the DC jack.Unplug the cable.
Latitude E5440 DC Jack

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude E5440 DC Jack

Topics: Dell Latitude Repair Manuals Dell Laptop Repair Dell Repair Manuals DC Jack Latitude E5440

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.