In this Dell laptop tutorial we are going to show you how to install and replace the USB / NIC Circuit Board on your Latitude E5440 laptop. These installation instructions have be made into 16 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude E5440 USB / NIC Circuit Board.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
Latitude E5440 USB NIC Circuit Board
Latitude E5440 USB NIC Circuit Board
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Latitude E5440 USB / NIC Circuit Board
Step 1
- Slide the latches over.
- Lift the battery out of the laptop.
Step 2
- Remove the screw.
- Slide the optical drive out of the laptop.
Step 3
- Remove the screws.
- Remove the bottom base.
- Remove the bottom screws.
Step 4
- Unplug the antenna cables.
- Unplug the speaker cable.
Step 5
- Remove the back hinge cover screws.
- Turn the laptop over and open it up.
- Remove the keyboard trim bezel.
Step 6
- Remove the screws.
- Lift the keyboard up and unplug the cable.
- Remove the keyboard.
Step 7
- Remove the hinge cover screws.
- Remove the hinge covers.
Step 8
- Unplug the cables.
- Remove the screws.
- Unsnap & remove the palmrest.
Step 9
- Remove the bracket screws.
- Remove the cable bracket.
- Unplug and loosen the display cable.
Step 10
- Remove the hinge screws.
- Remove the display assembly.
Step 11
- Unplug the cable.
- Remove the screw.
- Remove the circuit board.
Step 12
- Loosen the i/o cable.
- Unplug the fan cable.
Step 13
- Remove the screws.
- Remove the fan.
Step 14
- Remove the screws.
- Remove the express cage.
Step 15
- Unplug the cable.
- Remove the screws.
- Remove the motherboard.
Step 16
- Remove the screws.
- Remove the circuit board.
Latitude E5440 USB NIC Circuit Board
Latitude E5440 USB NIC Circuit Board
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|