In this Dell laptop tutorial we are going to show you how to install and replace the LCD Cable on your Latitude E5440 laptop. These installation instructions have be made into 13 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude E5440 LCD Cable.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
Latitude E5440 LCD Cable
Latitude E5440 LCD Cable
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Latitude E5440 LCD Cable
Step 1
- Slide the latches over.
- Lift the battery out of the laptop.
Step 2
- Remove the screw.
- Slide the optical drive out of the laptop.
Step 3
- Remove the screws.
- Remove the bottom base.
- Remove the bottom screws.
Step 4
- Unplug the antenna cables.
Step 5
- Remove the back hinge cover screws.
- Turn the laptop over and open it up.
- Remove the keyboard trim bezel.
Step 6
- Remove the screws.
- Lift the keyboard up and unplug the cable.
- Remove the keyboard.
Step 7
- Remove the hinge cover screws.
- Remove the hinge covers.
Step 8
- Unplug the cables.
- Remove the screws.
- Unsnap & remove the palmrest.
Step 9
- Remove the bracket screws.
- Remove the cable bracket.
- Unplug and loosen the display cable.
Step 10
- Remove the hinge screws.
- Remove the display assembly.
Step 11
- Unsnap the bezel, working around the the edge of the screen.
Step 12
- Remove the screen screws.
- Carefully lift the screen and turn it over.
Step 13
- Lift up the cable tape.
- Remove the spacer.
- Lift the latch and remove the cable.
Latitude E5440 LCD Cable
Latitude E5440 LCD Cable
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|