In this Dell laptop tutorial we are going to show you how to install and replace the LCD Back Cover Assembly on your Latitude E6440 laptop. These installation instructions have be made into 16 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude E6440 LCD Back Cover Assembly.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
Latitude E6440 LCD Back Cover
Latitude E6440 LCD Back Cover
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Latitude E6440 LCD Back Cover Assembly
Step 1
- Slide the latches over to unlock the battery.
- Lift the battery out of the laptop.
Step 2
- Remove the hard drive screws.(2 x M2.5 x 5mm)
- Remove the bottom door screws.(2 x M2.5 x 5mm)
- Remove the access door.
Step 6
- Unplug & loosen the display cables.
- Unplug and loosen the antenna cables.
Step 8
- Unplug & remove the DC jack.
Step 10
- Remove the bottom hinge screws.(2 x M2.5 x 5mm)
- Remove the back hinge screws.(2 x M2.5 x 8mm)
- Open & remove the display assembly.
Step 11
- Unsnap the bezel around the edge of the screen.
Step 14
- Loosen the tape.
- Unplug the LCD cable.
Step 16
- Remove the LCD display cable.
- The remaining piece is the back cover assembly.
Latitude E6440 LCD Back Cover
Latitude E6440 LCD Back Cover
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|