In this Dell laptop tutorial we are going to show you how to install and replace the DC Jack on your Inspiron 15 (5547) laptop. These installation instructions have be made into 12 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Inspiron 15 (5547) DC Jack.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
Inspiron 5547 DC Jack
Inspiron 15 5547 DC Jack
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Inspiron 15 (5547) DC Jack
Step 3
- Remove the 4 - M2.5 x 5mm screws.
- Using the tab, lift the Hard Drive out of the laptop.
- Unplug the hard drive connector cable.
Step 4
- Unplug & loosen the USB / SD circuit board cable.
- Unplug and loosen the LCD cable.
Step 6
- Press the latches in to loosen the keyboard.
- Carefully turn the keyboard over.
Step 8
- Unplug the palmrest cables.
- Remove the 9 - M2.5 x 5mm palmrest screws.
- Remove the 1 - M2.5 x 5mm screw under the palmrest cable.
Step 9
- Close the laptop & turn it over.
- Remove the 10 - M2.5 x 8mm bottom screws.
- Remove the Bottom Base by carefully prying it up around the edge of the laptop.
Step 10
- Remove the 2 - M2.5 x 5mm left hinge screws.
- Remove the 1 - M2.5 x 5mm right hinge screws.
- Carefully open the laptop & remove the LCD Display Assembly.
Step 11
Inspiron 5547 DC Jack
Inspiron 15 5547 DC Jack
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|