In this Dell laptop tutorial we are going to show you how to install and replace the Power & Volume Buttons Circuit Board on your Latitude E5420 laptop. These installation instructions have be made into 14 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude E5420 Power & Volume Buttons Circuit Board .
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Latitude E5420 Power & Volume Buttons Circuit Board
Step 1
- Slide the latches over to unlock the battery.
Step 2
- Lift the battery out of the laptop.
Step 3
- Remove the screws.
- Slide the door down and remove the door.
Step 4
- Remove the screw.
- Slide the optical drive out of the laptop.
Step 5
- Remove the bottom keyboard screws.
Step 6
- Remove the screws.
- Remove the CPU door.
Step 7
- Remove the bottom palmrest screws.
- Turn the laptop over and open it up.
Step 8
- Carefully pry up and unsnap the keyboard bezel.
Step 9
- Remove the keyboard screws.
- Carefully lift the keyboard up.
Step 10
- Unplug the keyboard cable.
- Remove the keyboard.
Step 11
- Remove the palmrest screws.
- Unplug the palmrest cables.
Step 12
- Unsnap & remove the palmrest starting on the left or right side.
Step 13
- Turn the palmrest over.
- Remove the screw.
- Unplug the cable.
Step 14
- Remove the power / volume circuit board.
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|