Dell Latitude E7450 DC Jack Removal and Installation

Created by on September 11, 2015
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the DC Jack on your Latitude E7450 laptop. These installation instructions have be made into 20 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude E7450 DC Jack.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screwdriver
  • 1 x small plastic scribe
Latitude E7450 DC Jack

Dell Laptop Replacement Parts Needed

DCBRK7450 Image
Eligible for $5.00 1st Class Shipping.
Only 19 left in stock - order soon.
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude E7450 DC Jack

Video tutorial repair manual



Installation and Removal Instructions
Latitude E7450 DC Jack

Slide the latch over to unlock the battery.

Step 1

  • Slide the latch over to unlock the battery.
  • Lift the Battery out of the laptop.
Slide the latch over to unlock the battery.Lift the Battery out of the laptop.Slide the latch over to unlock the battery.Slide the latch over to unlock the battery.
Remove the 2 - M2 x 3mm screws.

Step 2

Remove the 2 - M2 x 3mm screws.Slide the Access Door down and remove it from the laptop.Remove the 2 - M2 x 3mm screws.
Unplug the hard drive cable.

Step 3

  • Unplug the hard drive cable.
  • Remove the 3 - M2.5 x 5mm hard drive caddy screws.
  • Remove the Hard Drive.
Unplug the hard drive cable.Remove the 3 - M2.5 x 5mm hard drive caddy screws.Remove the Hard Drive.
Remove the 1 M2 x 3mm screw.

Step 4

  • Remove the 1 M2 x 3mm screw.
  • Remove the wireless card bracket.
Remove the 1 M2 x 3mm screw.Remove the wireless card bracket.
Unplug the antenna cables.

Step 5

Unplug the antenna cables.Remove the Wireless Card.Unplug the antenna cables.
Loosen the antenna cables.

Step 6

  • Loosen the antenna cables.
Remove the 2 - M2.5 x 5mm screws.

Step 7

Remove the 2 - M2.5 x 5mm screws.Unplug the cable.Remove the Cooling Fan.
Remove the 1 - M2 x 2mm bracket screw.

Step 8

  • Remove the 1 - M2 x 2mm bracket screw.
  • Remove the bracket.
  • Unplug & loosen the LCD cables.
Remove the 1 - M2 x 2mm bracket screw.Remove the bracket.Unplug & loosen the LCD cables.
Unplug the DC jack cable.

Step 9

  • Unplug the DC jack cable.
Remove the 10 - M2 x 3mm screws under the battery.

Step 10

  • Remove the 10 - M2 x 3mm screws under the battery.
  • Remove the 6 - M2.5 x 5mm screws under the access door.
Remove the 10 - M2 x 3mm screws under the battery.Remove the 6 - M2.5 x 5mm screws under the access door.
Loosen the plastic keyboard cable cover.

Step 11

  • Loosen the plastic keyboard cable cover.
  • Unplug the keyboard cable.
Loosen the plastic keyboard cable cover.Unplug the keyboard cable.
Remove the 2 - M2 x 3mm back hinge cover screws.

Step 12

  • Remove the 2 - M2 x 3mm back hinge cover screws.
  • Open the laptop.
Using a plastic scribe or small flat head screwdriver, carefully pry up the Keyboard Bezel & remove it from the laptop.

Step 13

  • Using a plastic scribe or small flat head screwdriver, carefully pry up the Keyboard Bezel & remove it from the laptop.
Using a plastic scribe or small flat head screwdriver, carefully pry up the Keyboard Bezel & remove it from the laptop.Using a plastic scribe or small flat head screwdriver, carefully pry up the Keyboard Bezel & remove it from the laptop.
Remove the keyboard 5 - M2 x 2.5mm screws.

Step 14

Remove the keyboard 5 - M2 x 2.5mm screws.Remove the Keyboard from the laptop.Remove the keyboard 5 - M2 x 2.5mm screws.
Unplug the palmrest cable.

Step 15

  • Unplug the palmrest cable.
  • Remove the 5 - M2.5 x 5mm palmrest screws.
Unplug the palmrest cable.Remove the 5 - M2.5 x 5mm palmrest screws.
Carefully pry up & remove the Palmrest Touchpad from the base.

Step 16

Carefully pry up & remove the Palmrest Touchpad from the base.Carefully pry up & remove the Palmrest Touchpad from the base.
Remove the 2 - M2 x 2mm hinge cover screws.

Step 17

Remove the 2 - M2 x 2mm hinge cover screws.Remove the Hinge Covers.Remove the 2 - M2 x 2mm hinge cover screws.
Remove the 2 - M2.5 x 5mm left hinge screws.

Step 18

Remove the 2 - M2.5 x 5mm left hinge screws.Remove the 2 - M2.5 x 5mm right hinge screws.Remove the LCD Display Assembly.
Remove the 2 - M2 x 3mm bracket screws.

Step 19

  • Remove the 2 - M2 x 3mm bracket screws.
  • Remove the bracket.
Remove the 2 - M2 x 3mm bracket screws.Remove the bracket.
Remove the DC Jack.

Step 20

Remove the DC Jack.Remove the DC Jack.
Latitude E7450 DC Jack

Dell Laptop Replacement Parts Needed

DCBRK7450 Image
Eligible for $5.00 1st Class Shipping.
Only 19 left in stock - order soon.
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude E7450 DC Jack

Topics: Dell Latitude Repair Manuals Dell Laptop Repair Dell Repair Manuals DC Jack Latitude E7450

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.