Dell Latitude E7450 Motherboard Removal and Installation

Created by on September 11, 2015
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the Motherboard on your Latitude E7450 laptop. These installation instructions have be made into 24 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude E7450 Motherboard.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screwdriver
  • 1 x small plastic scribe
Latitude E7450 Motherboard

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude E7450 Motherboard

Video tutorial repair manual



Installation and Removal Instructions
Latitude E7450 Motherboard

Slide the latch over to unlock the battery.

Step 1

  • Slide the latch over to unlock the battery.
  • Lift the Battery out of the laptop.
Slide the latch over to unlock the battery.Lift the Battery out of the laptop.Slide the latch over to unlock the battery.Slide the latch over to unlock the battery.
Remove the 2 - M2 x 3mm screws.

Step 2

Remove the 2 - M2 x 3mm screws.Slide the Access Door down and remove it from the laptop.Remove the 2 - M2 x 3mm screws.
Unplug the hard drive cable.

Step 3

  • Unplug the hard drive cable.
  • Remove the 3 - M2.5 x 5mm hard drive caddy screws.
  • Remove the hard drive.
Unplug the hard drive cable.Remove the 3 - M2.5 x 5mm hard drive caddy screws.Remove the hard drive.
Unplug & remove the CMOS Battery.

Step 4

Unplug & remove the CMOS Battery.Unplug & remove the CMOS Battery.Unplug & remove the CMOS Battery.
Separate the clips & remove the RAM Memory.

Step 5

Separate the clips & remove the RAM Memory.Separate the clips & remove the RAM Memory.Separate the clips & remove the RAM Memory.
Remove the 1 M2 x 3mm screw.

Step 6

  • Remove the 1 M2 x 3mm screw.
  • Remove the wireless card bracket.
Remove the 1 M2 x 3mm screw.Remove the wireless card bracket.
Unplug the antenna cables.

Step 7

Unplug the antenna cables.Remove the Wireless Card.Unplug the antenna cables.
Loosen the antenna cables.

Step 8

  • Loosen the antenna cables.
Remove the 2 - M2.5 x 5mm screws.

Step 9

Remove the 2 - M2.5 x 5mm screws.Unplug the cable.Remove the Cooling Fan.
Remove the 1 - M2 x 2mm bracket screw.

Step 10

  • Remove the 1 - M2 x 2mm bracket screw.
  • Remove the bracket.
  • Unplug & loosen the LCD cables.
Remove the 1 - M2 x 2mm bracket screw.Remove the bracket.Unplug & loosen the LCD cables.
Unplug the DC jack cable.

Step 11

  • Unplug the DC jack cable.
Remove the 10 - M2 x 3mm screws under the battery.

Step 12

  • Remove the 10 - M2 x 3mm screws under the battery.
  • Remove the 6 - M2.5 x 5mm screws under the access door.
Remove the 10 - M2 x 3mm screws under the battery.Remove the 6 - M2.5 x 5mm screws under the access door.
Loosen the plastic keyboard cable cover.

Step 13

  • Loosen the plastic keyboard cable cover.
  • Unplug the keyboard cable.
Loosen the plastic keyboard cable cover.Unplug the keyboard cable.
Remove the 2 - M2 x 3mm back hinge cover screws.

Step 14

  • Remove the 2 - M2 x 3mm back hinge cover screws.
  • Open the laptop.
Using a plastic scribe or small flat head screwdriver, carefully pry up the Keyboard Bezel & remove it from the laptop.

Step 15

  • Using a plastic scribe or small flat head screwdriver, carefully pry up the Keyboard Bezel & remove it from the laptop.
Using a plastic scribe or small flat head screwdriver, carefully pry up the Keyboard Bezel & remove it from the laptop.Using a plastic scribe or small flat head screwdriver, carefully pry up the Keyboard Bezel & remove it from the laptop.
Remove the keyboard 5 - M2 x 2.5mm screws.

Step 16

Remove the keyboard 5 - M2 x 2.5mm screws.Remove the Keyboard from the laptop.Remove the keyboard 5 - M2 x 2.5mm screws.
Unplug the palmrest cable.

Step 17

  • Unplug the palmrest cable.
  • Remove the 5 - M2.5 x 5mm palmrest screws.
Unplug the palmrest cable.Remove the 5 - M2.5 x 5mm palmrest screws.
Carefully pry up & remove the Palmrest Touchpad from the base.

Step 18

Carefully pry up & remove the Palmrest Touchpad from the base.Carefully pry up & remove the Palmrest Touchpad from the base.
Unplug the power button circuit board cable.

Step 19

  • Unplug the power button circuit board cable.
  • Unplug the speaker cable.
Unplug the power button circuit board cable.Unplug the speaker cable.
Remove the 2 - M2 x 2mm hinge cover screws.

Step 20

Remove the 2 - M2 x 2mm hinge cover screws.Remove the Hinge Covers.Remove the 2 - M2 x 2mm hinge cover screws.
Remove the 2 - M2.5 x 5mm left hinge screws.

Step 21

Remove the 2 - M2.5 x 5mm left hinge screws.Remove the 2 - M2.5 x 5mm right hinge screws.Remove the LCD Display Assembly.
Remove the 7 - M2.5 x 5mm motherboard screws.

Step 22

Remove the 7 - M2.5 x 5mm motherboard screws.Remove the Motherboard.Remove the 7 - M2.5 x 5mm motherboard screws.
Turn the motherboard over.

Step 23

  • Turn the motherboard over.
  • Remove the 4 - M2 x 3mm heatsink screws.
  • Remove the Heatsink.
Turn the motherboard over.Remove the 4 - M2 x 3mm heatsink screws.Remove the Heatsink.
The remaining piece is the Motherboard.

Step 24

Latitude E7450 Motherboard

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude E7450 Motherboard

Topics: Dell Latitude Repair Manuals Dell Laptop Repair Dell Repair Manuals Latitude E7450 Motherboard

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.