Dell Latitude E5450 LCD Back Cover (Non-Touchscreen) Removal and Installation

Created by on September 22, 2015
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the LCD Back Cover (Non-Touchscreen) on your Latitude E5450 laptop. These installation instructions have be made into 19 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude E5450 LCD Back Cover (Non-Touchscreen).

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screwdriver
  • 1 x small plastic scribe
Latitude E5450 LCD Back Cover

Dell Laptop Replacement Parts Needed

16JNG Image
Eligible for $5.00 Economy Shipping.
Only 1 left in stock - order soon.
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude E5450 LCD Back Cover

Video tutorial repair manual



Installation and Removal Instructions
Latitude E5450 LCD Back Cover (Non-Touchscreen)

Remove the 6 - M2 x 5mm screws.

Step 1

Remove the 6 - M2 x 5mm screws.Pry up & unsnap the access door.Remove the Access Door.Remove the 6 - M2 x 5mm screws.
Unplug the battery cable.

Step 2

  • Unplug the battery cable.
  • Remove the 2 - M2 x 5mm screws.
  • Lift the Battery out of the laptop.
Unplug the battery cable.Remove the 2 - M2 x 5mm screws.Lift the Battery out of the laptop.
Unplug the hard drive cable.

Step 3

  • Unplug the hard drive cable.
  • Remove the 3 - M2 x 3mm screws.
  • Lift the Hard Drive out of the laptop.
Unplug the hard drive cable.Remove the 3 - M2 x 3mm screws.Lift the Hard Drive out of the laptop.
Unplug & loosen the antenna cables.

Step 4

  • Unplug & loosen the antenna cables.
  • Remove the 1 - M2 x 3mm screw.
  • Remove the bracket.
Unplug & loosen the antenna cables.Remove the 1 - M2 x 3mm screw.Remove the bracket.Unplug & loosen the antenna cables.
Unplug & loosen the cable.

Step 5

  • Unplug & loosen the cable.
Unplug & loosen the cable.Unplug & loosen the cable.
Remove the 6 - M2 x 5mm screws.

Step 6

Remove the 6 - M2 x 5mm screws.Remove the 11 - M2 x 3mm screws.
Unplug the keyboard cable.

Step 7

  • Unplug the keyboard cable.
Remove the 2 - M2 x 3mm back hinge cover screws.

Step 8

  • Remove the 2 - M2 x 3mm back hinge cover screws.
  • Open up the laptop.
Carefully pry up & unsnap the Keyboard Bezel.

Step 9

Carefully pry up & unsnap the Keyboard Bezel.Carefully pry up & unsnap the Keyboard Bezel.
Remove the 4 - M2 x 2.5mm screws.

Step 10

Remove the 4 - M2 x 2.5mm screws.Remove the Keyboard.Remove the 4 - M2 x 2.5mm screws.
Unplug the palmrest cables.

Step 11

  • Unplug the palmrest cables.
Press up at the press point to unsnap and loosen the palmrest.

Step 12

  • Press up at the press point to unsnap and loosen the palmrest.
  • Remove the Palmrest Touchpad.
Press up at the press point to unsnap and loosen the palmrest.Remove the Palmrest Touchpad.Press up at the press point to unsnap and loosen the palmrest.
Remove the 4 - M2 x 5mm hinge cover screws.

Step 13

Remove the 4 - M2 x 5mm hinge cover screws.Remove the Hinge Covers.
Remove the 4 - M2 x 5mm hinge screws.

Step 14

Remove the 4 - M2 x 5mm hinge screws.Remove the LCD Display Assembly.
Carefully unsnap the LCD bezel working your way around the edge of the screen. ***It may be taped or glued down and require a plastic scribe for removal.

Step 15

  • Carefully unsnap the LCD bezel working your way around the edge of the screen. ***It may be taped or glued down and require a plastic scribe for removal.
  • Remove the LCD Bezel.
Carefully unsnap the LCD bezel working your way around the edge of the screen. ***It may be taped or glued down and require a plastic scribe for removal.Remove the LCD Bezel.
Remove the 4 - M2 x 3mm screws.

Step 16

  • Remove the 4 - M2 x 3mm screws.
  • Lift the screen & turn it over.
Remove the 4 - M2 x 3mm screws.Lift the screen & turn it over.
Loosen the tape.

Step 17

  • Loosen the tape.
  • Remove the spacer.
  • Unplug the cable.
  • Remove the LCD Screen.
Loosen the tape.Remove the spacer.Unplug the cable.Remove the LCD Screen.
Unplug the cable.

Step 18

Unplug the cable.Remove the LCD Camera.Unplug the cable.
Remove the LCD Cable.

Step 19

Remove the LCD Cable.The remaining piece is the LCD Back Cover.Remove the LCD Cable.
Latitude E5450 LCD Back Cover

Dell Laptop Replacement Parts Needed

16JNG Image
Eligible for $5.00 Economy Shipping.
Only 1 left in stock - order soon.
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude E5450 LCD Back Cover

Topics: Dell Latitude Repair Manuals Dell Laptop Repair Dell Repair Manuals LCD Back Cover Latitude E5450

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.