In this Dell laptop tutorial we are going to show you how to install and replace the Heatsink (Integrated Graphics) on your Inspiron 15-5545 (P39F-002) laptop. These installation instructions have be made into 10 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Inspiron 15-5545 (P39F-002) Heatsink (Integrated Graphics).
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Inspiron 15 (5545) Heatsink (Integrated Graphics)
![Remove the 4 - M2.5 x 5mm screws.](https://www.parts-people.com/blog/wp-content/uploads/2015/01/Insp15-5547HardDriveScrewSizes-300x169.jpg)
![Remove the 4 - M2.5 x 5mm screws.](https://www.parts-people.com/blog/wp-content/uploads/2015/01/Insp15-5547HardDriveScrewSizes-300x169.jpg)
Step 3
- Remove the 4 - M2.5 x 5mm screws.
- Using the tab, lift the Hard Drive out of the laptop.
- Unplug the hard drive connector cable.
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![Unplug & loosen the USB / SD circuit board cable.](https://www.parts-people.com/blog/wp-content/uploads/2014/12/Insp15-5547UsbSdCircuitBoardCable-300x168.jpg)
![Unplug & loosen the USB / SD circuit board cable.](https://www.parts-people.com/blog/wp-content/uploads/2014/12/Insp15-5547UsbSdCircuitBoardCable-300x168.jpg)
Step 4
- Unplug & loosen the USB / SD circuit board cable.
- Unplug and loosen the LCD cable.
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![Press the latches in to loosen the keyboard.](https://www.parts-people.com/blog/wp-content/uploads/2014/12/Insp15-5547KeyboardClips-300x168.jpg)
![Press the latches in to loosen the keyboard.](https://www.parts-people.com/blog/wp-content/uploads/2014/12/Insp15-5547KeyboardClips-300x168.jpg)
Step 6
- Press the latches in to loosen the keyboard.
- Carefully turn the keyboard over.
![]() ![]() ![]() ![]() |
![Unplug the palmrest cables.](https://www.parts-people.com/blog/wp-content/uploads/2014/12/Insp15-5547PalmrestCables-300x168.jpg)
![Unplug the palmrest cables.](https://www.parts-people.com/blog/wp-content/uploads/2014/12/Insp15-5547PalmrestCables-300x168.jpg)
Step 8
- Unplug the palmrest cables.
- Remove the 9 - M2.5 x 5mm palmrest screws.
- Remove the 1 - M2.5 x 5mm screw under the palmrest cable.
![]() ![]() ![]() ![]() ![]() ![]() |
![Close the laptop & turn it over.](https://www.parts-people.com/blog/wp-content/uploads/2015/01/Insp15-5547BaseScrewSizes-300x169.jpg)
![Close the laptop & turn it over.](https://www.parts-people.com/blog/wp-content/uploads/2015/01/Insp15-5547BaseScrewSizes-300x169.jpg)
Step 9
- Close the laptop & turn it over.
- Remove the 10 - M2.5 x 8mm bottom screws.
- Remove the Bottom Base by carefully prying it up around the edge of the laptop.
![]() ![]() ![]() ![]() |
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|