In this Dell laptop tutorial we are going to show you how to install and replace the Left & Right Support Bracket on your Latitude E5430 laptop. These installation instructions have be made into 19 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude E5430 Left & Right Support Bracket.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Latitude E5430 Left & Right Support Bracket
Step 3
- Remove the 2 - M2 x 6mm screws.
Step 4
- Remove the screws.
- Using the tab, slide the hard drive up and lift it out of the laptop.
Step 6
- Unplug and loosen the antenna cables.
Step 7
- Remove the 2 - M2.5 x 5mm screws.
- Remove the 2 - M2.5 x 8mm screws.
- Remove the CPU Access Door.
Step 8
- Remove the 2 - M2 x 3mm screws under the optical drive.
- Remove the 3 - M2.5 x 5mm screws.
- Remove 6 - M2.5 x 8mm the screws.
Step 9
- Turn the laptop over & open it up.
- Unsnap & remove the Keyboard Bezel.
- Remove the 4 - M2 x 3mm screws.
Step 12
- Unplug the palmrest cables.
- Unsnap & remove the palmrest.
Step 13
- Unplug the LCD cable.
- Pull the antenna cables through the motherboard.
Step 15
- Remove the display assembly.
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|