Dell Latitude E5250 (P25S001) LED Circuit Board Removal and Installation

Created by on May 9, 2016
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the LED Circuit Board on your Latitude E5250 (P25S001) laptop. These installation instructions have be made into 12 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude E5250 (P25S001) LED Circuit Board.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screwdriver
  • 1 x small plastic scribe
Latitude E5250 LED Circuit Board

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude E5250 LED Circuit Board

Video tutorial repair manual



Installation and Removal Instructions
Latitude E5250 (P25S001) LED Circuit Board

Remove the 6 - M2 x 5mm screws.

Step 1

Remove the 6 - M2 x 5mm screws.Unsnap & remove the Access Door.Remove the 6 - M2 x 5mm screws.Remove the 6 - M2 x 5mm screws.
Unplug the battery cable.

Step 2

  • Unplug the battery cable.
  • Remove the 1 - M2 x 5mm screw.
  • Remove the Battery.
Unplug the battery cable.Remove the 1 - M2 x 5mm screw.Remove the Battery.
Unplug the hard drive cable.

Step 3

Unplug the hard drive cable.Remove the 2 - M2 x 3mm screws.Remove the Hard Drive.
Unplug the cable.

Step 4

Unplug the cable.Remove the 2 - M2 x 5mm screws.Remove the Cooling Fan.Unplug the cable.
Unplug & loosen the antenna cables.

Step 5

  • Unplug & loosen the antenna cables.
  • Remove the 1 - M2 x 3mm screw.
  • Remove the bracket.
  • Unplug & loosen the LCD display cable.
Unplug & loosen the antenna cables.Remove the 1 - M2 x 3mm screw.Remove the bracket.Unplug & loosen the LCD display cable.
Remove the 11 - M2 x 5mm screws.

Step 6

Remove the 11 - M2 x 5mm screws.Remove the 6 - M2 x 3mm screws.
Unplug the keyboard cable.

Step 7

  • Unplug the keyboard cable.
  • Turn the laptop over and open it up.
Pry up and unsnap the Keyboard Bezel.

Step 8

Pry up and unsnap the Keyboard Bezel.Pry up and unsnap the Keyboard Bezel.Pry up and unsnap the Keyboard Bezel.
Remove the 5 - M2 x 2.5mm screws.

Step 9

Remove the 5 - M2 x 2.5mm screws.Remove the Keyboard.Remove the 5 - M2 x 2.5mm screws.
Remove the 1 - M2 x 5mm screw.

Step 10

  • Remove the 1 - M2 x 5mm screw.
  • Unplug the LED cable.
  • Unplug the Touchpad Cable.
Remove the 1 - M2 x 5mm screw.Unplug the LED cable.Unplug the Touchpad Cable.Remove the 1 - M2 x 5mm screw.
Pry up & remove the Palmrest Touchpad.

Step 11

Pry up & remove the Palmrest Touchpad.Pry up & remove the Palmrest Touchpad.
Turn the palmrest over.

Step 12

Turn the palmrest over.Unplug the cable.Remove the 1 - M2 x 2mm Wafer screw.Remove the LED Circuit Board.
Latitude E5250 LED Circuit Board

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude E5250 LED Circuit Board

Topics: Dell Latitude Repair Manuals Dell Laptop Repair Dell Repair Manuals LED Circuit Board Latitude E5250

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.