In this Dell laptop tutorial we are going to show you how to install and replace the VGA USB Circuit Board on your Dell Latitude E6520 (P14F001) laptop. These installation instructions have be made into 21 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell Latitude E6520 (P14F001) VGA USB Circuit Board.
Latitude E6520 usb
Dell Laptop Replacement Parts Needed |
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
|
Latitude E6520 usb
Video tutorial repair manual
Installation and Removal Instructions
Dell Latitude E6520 (P14F001) VGA USB Circuit Board
Step 1
- Slide the latches over to unlock the battery.
- Lift the Battery out of the laptop.
Step 3
- Press the SD Card in to eject it from the laptop.
Step 11
- Remove the 2 - M2.5 x 5mm LCD cable bracket screws.
- Remove the LCD cable bracket.
Step 12
- Unplug & loosen the LCD Cable.
- Unplug & loosen the DC Jack Cable.
Step 14
- Remove the 10 - M2.5 x 5mm bottom palmrest screws.
- Remove the 2 - M2.5 x 5mm bottom hinge screws.
- Remove the 2 - M2.5 x 5mm (machined head) back hinge screws.
- Carefully open the LCD Display Assembly & remove it from the laptop base.
Step 15
- Using a small flat head screwdriver or plastic scribe, carefully pry up & unsnap the Keyboard Bezel.
Step 16
- Remove the 3 - M2 x 3mm keyboard screws.
- Carefully lift the keyboard up & turn it over.
- Unplug the keyboard cable.
- Remove the Keyboard.
Step 19
- Unplug the Wifi Switch Cable.
- Unplug the Smart Card Slot Cable.
- Unplug the Speaker Cable.
Latitude E6520 usb
Dell Laptop Replacement Parts Needed |
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
|
Latitude E6520 usb