Dell Latitude D630c (PP24L) LCD Display Screen Cable Removal and Installation

By Ricardo on January 24, 2017 · 4:36 pm

In this Dell laptop tutorial we are going to show you how to install and replace the LCD Display Screen Cable on your Dell Latitude D630c (PP24L) laptop. These installation instructions have be made into 9 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell Latitude D630c (PP24L) LCD Display Screen Cable.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

1 x small phillips head screw driver
1 x small plastic scribe

Latitude D630c LCD Screen Screen Cable

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!

Use this coupon code to save 5% off these parts

DIYM514

Latitude D630c LCD Display Screen Cable

Video tutorial repair manual

Installation and Removal Instructions
Dell Latitude D630c LCD Display Screen Cable

Slide the battery down and lift out of the laptop.

Step 1

Slide the battery latches over.
Slide the battery down and lift out of the laptop.

Step 2

Turn the laptop over and open it as wide as possible, approximately 180 degrees.
Remove the screw hole covers.
Remove the (6) 2.5mm x 5mm x 1.5mm bezel screws.

Starting at the bottom of the LCD screen, lift the bezel until it unsnaps and work your way around the edge of the screen.

Step 3

Starting at the bottom of the LCD screen, lift the bezel until it unsnaps and work your way around the edge of the screen.

Unplug and remove the LCD cable from the channel routing.

Step 4

Unplug and remove the LCD cable from the channel routing.

Remove the (6) 2.5mm x 5mm screws at the bottom of the screen.

Step 5

Remove the (2) 2mm x 3mm screws at the top of the screen.
Remove the (6) 2.5mm x 5mm screws at the bottom of the screen.

Unplug the LCD cable from the LCD screen and inverter.

Step 6

Remove the LCD screen from the LCD back assembly and turn it over.
Unplug the LCD cable from the LCD screen and inverter.

Remove the (8) 2mm x 3mm screws and remove the mounting rails on the left and right sides of the LCD screen.

Step 7

Remove the (8) 2mm x 3mm screws and remove the mounting rails on the left and right sides of the LCD screen.

The WXGA+ cable will work fine with a WXGA screen but the WXGA cable will not work with a WXGA+ screen. Before buying parts it is important to at least find out the cable part number to insure you order the correct resolution screen.**

Step 8

**When replacing the LCD Screen and LCD Cable on the Latitude D620/D630 Laptop, the resolution is a factor. If you replace a WXGA screen with WXGA+ screen, and your original cable is WXGA (p/n NT108 on a D630 and p/n MH179 on a D620), then the image on the screen will appear to have every other vertical row of pixels missing.(Shown in the image below)
The WXGA+ cable will work fine with a WXGA screen but the WXGA cable will not work with a WXGA+ screen. Before buying parts it is important to at least find out the cable part number to insure you order the correct resolution screen.**