In this Dell laptop tutorial we are going to show you how to install and replace the LCD Display Screen Rail on your Dell Latitude D630c (PP24L) laptop. These installation instructions have be made into 7 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell Latitude D630c (PP24L) LCD Display Screen Rail.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screw driver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Dell Latitude D630c LCD Display Screen Rail
Step 1
- Slide the battery latches over.
- Slide the battery down and lift out of the laptop.
Step 2
- Turn the laptop over and open it as wide as possible, approximately 180 degrees.
- Remove the screw hole covers.
- Remove the (6) 2.5mm x 5mm x 1.5mm bezel screws.
Step 3
- Starting at the bottom of the LCD screen, lift the bezel until it unsnaps and work your way around the edge of the screen.
Step 4
- Unplug and remove the LCD cable from the channel routing.
Step 5
- Remove the (2) 2mm x 3mm screws at the top of the screen.
- Remove the (6) 2.5mm x 5mm screws at the bottom of the screen.
Step 6
- Remove the LCD screen from the LCD back assembly and turn it over.
- Unplug the LCD cable from the LCD screen and inverter.
Step 7
- Remove the (8) 2mm x 3mm screws and remove the mounting rails on the left and right sides of the LCD screen.
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|