Dell Precision M2400 (PP27L) LCD Back Cover Removal & Installation

By on July 18, 2017 · 11:59 am
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the LCD Back Cover on your Dell Precision M2400 laptop. These installation instructions have be made into 11 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell Precision M2400 LCD Back Cover.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screw driver
  • 1 x small plastic scribe
Precision M2400 LCD Back Cover

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Precision M2400 LCD Back Cover


Installation and Removal Instructions
Dell Precision M2400 LCD Back Cover

Slide the battery latches over and slide the Battery up.

Step 1

  • Slide the battery latches over and slide the Battery up.
Loosen the access panel door cover screw (Captive screw).

Step 2

  • Loosen the access panel door cover screw (Captive screw).
  • Remove the hard drive screws (2 x M2.5 x 5mm).
  • Slide the Bottom Base Cover down and lift it off of the laptop.
Loosen the access panel door cover screw (Captive screw). Remove the hard drive screws (2 x M2.5 x 5mm).Slide the Bottom Base Cover down and lift it off of the laptop.
Unscrew left and right hinge covers (2 x M2.5 x 5mm).

Step 3

  • Unscrew left and right hinge covers (2 x M2.5 x 5mm).
  • Slide the Hinge Covers up and lift them off of the laptop base.
Unscrew left and right hinge covers (2 x M2.5 x 5mm).Slide the Hinge Covers up and lift them off of the laptop base.
Loosen the antenna cables and disconnect the LCD Cable.

Step 4

  • Loosen the antenna cables and disconnect the LCD Cable.
  • Remove hinge screws (2 x M2.5 x 5mm).
  • Turn the laptop over, open the LCD, and lift it off of the base.
Loosen the antenna cables and disconnect the LCD Cable. Remove hinge screws (2 x M2.5 x 5mm).
Carefully remove the LCD Bezel by unsnapping it around the edge of the screen.

Step 5

  • Carefully remove the LCD Bezel by unsnapping it around the edge of the screen.
Unscrew and remove LCD Screen (4 x

Step 6

Disconnect the LCD cable.

Step 7

  • Disconnect the LCD cable.
  • Unplug inverter and remove screen.
Disconnect the LCD cable. Unplug inverter and remove screen.
Pivot the left hinge up and slide the LCD ribbon cable out.

Step 8

  • Pivot the left hinge up and slide the LCD ribbon cable out.
  • Unscrew the Ambient Light Sensor (2 x M2 x 3mm).
Unplug the LCD ribbon cable from the inverter.

Step 9

  • Unplug the LCD ribbon cable from the inverter.
  • Unscrew the camera screw.
Unplug the LCD ribbon cable from the inverter. Unscrew the camera screw.
Slide the camera up and unplug the camera cable.

Step 10

  • Slide the camera up and unplug the camera cable.
  • Remove the LCD cable from the back assembly.
The remaining piece is the undefined

Step 11

Precision M2400 LCD Back Cover

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Precision M2400 LCD Back Cover

Topics: Dell Precision Repair Manuals Dell Laptop Repair Dell Repair Manuals LCD Back Cover Precision M2400

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.