In this Dell laptop tutorial we are going to show you how to install and replace the LCD Hinge Rails on your Dell Latitude 3540 (P28F004) laptop. These installation instructions have be made into 16 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell Latitude 3540 (P28F004) LCD Hinge Rails.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small flat head screwdriver
- 1 x small plastic scribe (optional)
Latitude 3540 Hinge Rail
Latitude 3540 LCD Hinge Rail
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Dell Latitude 3540 (P28F004) LCD Hinge Rails
Step 4
- Remove the 12 - M2.5 x 5mm bottom palmrest screws.
Step 5
- Turn the laptop over and open it up.
- Using a plastic scribe or flat head screwdriver, press in the keyboard latches at the top of the keyboard.
Step 7
- Unplug the palmrest cables.
- Remove the 5 - M2.5 x 5mm palmrest screws and the 2 - M2 x 3mm palmrest screws.
Step 8
- Carefully lift and pry the right edge of the palmrest.
- Work your way around the bottom edge and side.
- Remove the palmrest touchpad.
Step 11
- Remove the complete LCD display.
Step 16
- Remove the 2 - M2.5 x 4mm top hinge rail screws.
- Remove the 2 - M2.5 x 4mm bottom hinge rail screws.
- Lift the hinge rails out of the back cover assembly.
Latitude 3540 Hinge Rail
Latitude 3540 LCD Hinge Rail
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|