In this Dell laptop tutorial we are going to show you how to install and replace the USB Circuit Board on your Inspiron 15 N5040 (P18F002) laptop. These installation instructions have be made into 8 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Inspiron 15 N5040 (P18F002) USB Circuit Board .
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small flat head screwdriver
- 1 x plastic scribe (optional)
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Inspiron 15 N5040 (P18F002) USB Circuit Board
Step 2
- Remove the 2 hard drive screws.
- Under the battery, remove the hinge cover screw.
Step 3
- Remove the 11 bottom palmrest screws.
Step 4
- Turn the laptop over and open it up.
- Press in the 4 keyboard clips to loosen the Keyboard.
Step 5
- Carefully lift the keyboard and turn it over.
- Unplug the keyboard cable.
Step 6
- Loosen the 2 top palmrest screws. You will not be able to remove them completely.
Step 7
- Unplug the 2 palmrest cables.
- Carefully unsnap and lift off the Palmrest Touchpad.
Step 8
- Unplug the USB circuit board cable.
- Carefully press the clip back and remove the USB Circuit Board.
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|