In this Dell laptop tutorial we are going to show you how to install and replace the LCD Cable on your Latitude 2120 (P02T002) laptop. These installation instructions have be made into 17 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Latitude 2120 (P02T002) LCD Cable.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
- 1 x small plastic scribe
Latitude 2120 LCD Cable
Latitude 2120 LCD Cable
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Latitude 2120 (P02T002) LCD Cable
Step 3
- Remove the 2 - M2 x 5mm keyboard screws.
- Remove the 4 - M2.5 x 10mm base screws.
- Open the laptop & turn it on it's side.
Step 4
- Using a small point, like a small screwdriver or paperclip, press through the keyboard screw holes to loosen the keyboard.
Step 6
- Remove the 3 - M2.5 x 5mm screws under the keyboard.
- Unplug the motherboard cables.
- Close the laptop & turn it over.
Step 7
- Remove the Bottom Base Cover.
Step 8
- Remove the 4 - M2.5 x 5mm screws.
- Slide the Hard Drive to the left & remove it from the laptop.
Step 10
- Unplug & loosen the touchscreen cable.
- Unplug the display cable.
Step 11
- Unplug the antenna cable.
- Unplug the camera cable.
- Loosen the camera & antenna cables.
Step 15
- Unplug the digitizer cable.
- Remove the 4 - M2.5 x 5mm LCD screen screws.
- Lift the screen & turn it over.
Latitude 2120 LCD Cable
Latitude 2120 LCD Cable
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|