In this Dell laptop tutorial we are going to show you how to install and replace the CPU on your Inspiron 15 N5020 laptop. These installation instructions have be made into 10 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Inspiron 15 N5020 CPU.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screw driver
- 1 x small plastic scribe
Inspiron N5020 CPU
Inspiron 15 N5020 CPU
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Inspiron 15 N5020 CPU
Step 1
- Slide the battery locking latch to the unlocked position.
- Slide the battery latch over and the battery out of the laptop.
Step 2
- Remove the (2) 2.5mm x 5mm screws.
Step 3
- Remove the 12 base screws.
Step 4
- Turn the laptop over and open it up.
- Using a scribe or a flat head screw driver, press in the 3 latches that allow the keyboard to lift up.
Step 5
- Carefully lift up the keyboard and slide it forward.
- Unplug the keyboard cable.
- Remove the keyboard from the laptop.
Step 6
- Unplug the 3 palmrest cables.
- Carefully unsnap the palmrest from the laptop base.
Step 7
- Unplug the LCD cable and carefully remove it from the fan.
Step 8
- Unplug the fan.
- Loosen the 4 heatsink screws.
- Lift the heatsink and fan away from the motherboard.
Step 9
- Turn the CPU locking screw counterclockwise until the CPU is loose.
- Lift the CPU out of the motherboard socket.
Step 10
- Installation note 1: Make sure to replace thermal compound or thermal pads on the CPU and heatsink.
- Installation note 2: Tighten the heatsink screws in the order listed on the heatsink.
- **This image is used only as an example.**
Inspiron N5020 CPU
Inspiron 15 N5020 CPU
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|