Dell Inspiron 15 M5030 (P07F002) CPU Removal Tutorial

By Ricardo on April 1, 2022 · 1:08 pm

In this Dell laptop tutorial we are going to show you how to install and replace the CPU on your Inspiron 15 M5030 laptop. These installation instructions have be made into 10 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Inspiron 15 M5030 CPU.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

1 x small phillips head screw driver
1 x small plastic scribe

Inspiron M5030 CPU

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!

Use this coupon code to save 5% off these parts

DIYM514

Inspiron 15 M5030 CPU

Video tutorial repair manual

Installation and Removal Instructions
Inspiron 15 M5030 CPU

Slide the battery locking latch to the unlocked position.

Step 1

Slide the battery locking latch to the unlocked position.
Slide the battery latch over and the battery out of the laptop.

Step 2

Remove the (2) 2.5mm x 5mm screws.

Step 3

Remove the 12 base screws.

Step 4

Turn the laptop over and open it up.
Using a scribe or a flat head screw driver, press in the 3 latches that allow the keyboard to lift up.

Carefully lift up the keyboard and slide it forward.

Step 5

Carefully lift up the keyboard and slide it forward.
Unplug the keyboard cable.
Remove the keyboard from the laptop.

Step 6

Unplug the 3 palmrest cables.
Carefully unsnap the palmrest from the laptop base.

Unplug the LCD cable and carefully remove it from the fan.

Step 7

Unplug the LCD cable and carefully remove it from the fan.

Step 8

Unplug the fan.
Loosen the 4 heatsink screws.
Lift the heatsink and fan away from the motherboard.

Turn the CPU locking screw counterclockwise until the CPU is loose.

Step 9

Turn the CPU locking screw counterclockwise until the CPU is loose.
Lift the CPU out of the motherboard socket.

Installation note 1: Make sure to replace thermal compound or thermal pads on the CPU and heatsink.

Step 10

Installation note 1: Make sure to replace thermal compound or thermal pads on the CPU and heatsink.
Installation note 2: Tighten the heatsink screws in the order listed on the heatsink.
**This image is used only as an example.**