In this Dell laptop tutorial we are going to show you how to install and replace the CPU on your Dell Inspiron 1420 laptop. These installation instructions have be made into 5 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell Inspiron 1420 CPU.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screwdriver
Inspiron 1420 CPU CPU
Inspiron 1420 CPU Processor
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Dell Inspiron 1420 CPU
Step 1
- Slide the 2 battery latches towards the outside of the laptop.
- Slide the battery out.
Step 2
- Loosen the 3 retaining screws.
- Remove the CPU processor door.
Step 3
- Loosen the 4 heat sink screws.
- Lift the heat sink away from the motherboard.
Step 4
- Using a flat head screw driver, turn the CPU locking screw counterclockwise approximately 180 degrees.
- Lift the CPU processor away from the motherboard.
Step 5
- Installation note 1: Make sure to replace thermal compound or thermal pads on the CPU and heatsink.
- Installation note 2: Tighten the heatsink screws in the order listed on the heatsink.