In this Dell laptop tutorial we are going to show you how to install and replace the Hinge Rails on your Vostro 1400 laptop. These installation instructions have be made into 7 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Vostro 1400 Hinge Rails.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screw driver
- 1 x small plastic scribe
Vostro 1400 Hinge Rails
Vostro 1400 Hinge Rails
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Vostro 1400 Hinge Rails
Step 1
- Slide the 2 battery latches towards the outside of the laptop.
- Slide the battery out.
Step 2
- Turn the laptop over and open it up as wide as possible.
- Remove the screw hole covers.
Step 3
- Remove the 6 bezel screws.
- Starting at the bottom, carefully unsnap the bezel working your way around the screen.
Step 4
- Remove the (2) 2.5mm x 5mm screws.
- Unplug the camera cable.
Step 5
- Carefully lift the screen out of the back assembly.
- Lay the screen onto the keyboard and unplug the display cable.
- Unplug the inverter cable.
Step 6
- Lift the screen away from the laptop.
Step 7
- Remove the (3) 2mm x 3mm screws and LCD rails from the left and right side of the screen.
Vostro 1400 Hinge Rails
Vostro 1400 Hinge Rails
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|