In this Dell laptop tutorial we are going to show you how to install and replace the Keyboard on your Dell Inspiron 1525n laptop. These installation instructions have be made into 6 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell Inspiron 1525n Keyboard.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screw driver
- 1 x small plastic scribe
Inspiron 1525n KeyboardInspiron 1525n Keyboard
Video tutorial repair manual
Installation and Removal Instructions
Dell Inspiron 1525n Keyboard
Step 1
- Remove the battery.
Step 2
- Power Button Cover
- Remove two 2mm x 3mm screws that hold the 1525/1526 center control power button cover to the base of the computer.
Step 3
- Turn the computer over (as if you were typing on it), and fully open the display (approximately 180 degrees, or as far as possible).
- Lift and unsnap the 1525/1526 center control power button cover using a small flat head screw driver or a plastic scribe from the backside of the computer, from right to left. (Be very careful removing it because the plastic can be fragile. (Use caution lifting the power button cover off of the laptop, a cable is attached beneath it that can break easily.)
Step 4
- Disconnect the media control cable under the power button cover and lift off the power button cover.
Step 5
- Keyboard Removal
- Unscrew the (2) 2.5mm x 5mmscrews above the keyboard and gently lift up the keyboard to reveal the ribbon cable. Be careful lifting the keyboard because it is very easy to cause damage to the ribbon cable or the motherboard connector. (If the motherboard connector breaks, it is very hard to find replacements for them without replacing the entire motherboard.)
Step 6
- Lift the keyboard cable connector latch and remove the keyboard ribbon cable and keyboard.
Inspiron 1525n KeyboardInspiron 1525n Keyboard