Laptop & Tablet Parts
Desktop & All-in-one Parts
Dell Server Parts
In this Dell laptop tutorial we are going to show you how to install and replace the Power Button Cover on your Dell Inspiron 1525n laptop. These installation instructions have be made into 4 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Dell Inspiron 1525n Power Button Cover.
Before you begin
Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x small phillips head screw driver
- 1 x small plastic scribe
Inspiron 1525n Power Button CoverInspiron 1525n Power Button Cover
Video tutorial repair manual
Installation and Removal Instructions
Dell Inspiron 1525n Power Button Cover
Step 1
- Remove the battery.
Step 2
- Power Button Cover
- Remove two 2mm x 3mm screws that hold the 1525/1526 center control power button cover to the base of the computer.
Step 3
- Turn the computer over (as if you were typing on it), and fully open the display (approximately 180 degrees, or as far as possible).
- Lift and unsnap the 1525/1526 center control power button cover using a small flat head screw driver or a plastic scribe from the backside of the computer, from right to left. (Be very careful removing it because the plastic can be fragile. (Use caution lifting the power button cover off of the laptop, a cable is attached beneath it that can break easily.)
Step 4
- Disconnect the media control cable under the power button cover and lift off the power button cover.
|
