Dell Vostro 15-3558 (P52F-001) DC Jack Removal & Installation

Created by on July 25, 2022
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the DC Jack on your Vostro 15 (3558) laptop. These installation instructions have be made into 15 easy to follow printable steps. We have also create a video tutorial that shows you how to install your Vostro 15 (3558) DC Jack.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small phillips head screwdriver
  • 1 x small plastic scribe
Vostro 3558 DC Jack

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Vostro 15 3558 DC Jack

Video tutorial repair manual



Installation and Removal Instructions
Vostro 15 (3558) DC Jack

Slide the latch to the left to unlock the battery.

Step 1

  • Slide the latch to the left to unlock the battery.
  • Lift the Battery out of the laptop.
Slide the latch to the left to unlock the battery.Lift the Battery out of the laptop.Slide the latch to the left to unlock the battery.Slide the latch to the left to unlock the battery.
Turn the laptop over and open it up.

Step 2

  • Turn the laptop over and open it up.
  • Using a scribe of flat head screwdriver, press in the keyboard latches and pry up the keyboard.
Turn the laptop over and open it up.Using a scribe of flat head screwdriver, press in the keyboard latches and pry up the keyboard.
Unplug the keyboard cable.

Step 3

  • Unplug the keyboard cable.
  • Remove the Keyboard.
Unplug the keyboard cable.Remove the Keyboard.Unplug the keyboard cable.Unplug the keyboard cable.
Unplug the optical drive cable.

Step 4

  • Unplug the optical drive cable.
  • Unplug the power button cable.
  • Unplug the touchpad cable.
  • Remove the 6 - M2.5 x 5mm screws under the keyboard.
  • Close the laptop & turn it over.
Unplug the optical drive cable.Unplug the power button cable.Unplug the touchpad cable.Remove the 6 - M2.5 x 5mm screws under the keyboard.
Remove the 1- M2 x 5mm screw.

Step 5

Remove the 1- M2 x 5mm screw.Use the slot under the battery to slide the optical drive out. Remove the DVD Optical Drive.Remove the 1- M2 x 5mm screw.
Remove the 2 - M2.5 x 8mm screws.

Step 6

Remove the 2 - M2.5 x 8mm screws.Remove the Access Door.Remove the 2 - M2.5 x 8mm screws.
Unplug the hard drive cable.

Step 7

  • Unplug the hard drive cable.
  • Remove the 4 - M2.5 x 8mm screws.
  • Lift the Hard Drive out of the laptop.
Unplug the hard drive cable.Remove the 4 - M2.5 x 8mm screws.Lift the Hard Drive out of the laptop.Unplug the hard drive cable.
Remove the 1 - M2 x 3mm screw.

Step 8

  • Remove the 1 - M2 x 3mm screw.
  • Remove the bracket.
Remove the 1 - M2 x 3mm screw.Remove the bracket.
Unplug the antenna cables.

Step 9

Unplug the antenna cables.Remove the Wireless WLAN Card.Unplug the antenna cables.
Remove the 3 - M2 x 2mm Wafer screws under the optical drive.

Step 10

Remove the 3 - M2 x 2mm Wafer screws under the optical drive.Remove the 2 - M2.5 x 8mm hinge screws.Remove the 4 - M2.5 x 5mm screws under the battery.Remove the 6 - M2.5 x 8mm screws under the access door.
Unplug the speaker cable.

Step 11

  • Unplug the speaker cable.
  • Unsnap & separate the Bottom Base from the laptop.
Unplug the speaker cable.Unsnap & separate the Bottom Base from the laptop.Unplug the speaker cable.Unplug the speaker cable.
Loosen the antenna cables.

Step 12

  • Loosen the antenna cables.
  • Unplug & loosen the LCD cable.
Loosen the antenna cables.Unplug & loosen the LCD cable.Loosen the antenna cables.
Open the display.

Step 13

Open the display.Remove the 4 - M2.5 x 8mm hinge screws.
Remove the 1 - M2.5 x 5mm screw & loosen the circuit board but do not unplug the cable.

Step 14

  • Remove the 1 - M2.5 x 5mm screw & loosen the circuit board but do not unplug the cable.
  • Remove the 1 -M2 x 3mm screw.
Remove the 1 - M2.5 x 5mm screw & loosen the circuit board but do not unplug the cable.Remove the 1 -M2 x 3mm screw.
Lift the motherboard & turn it over.

Step 15

  • Lift the motherboard & turn it over.
  • Unplug the DC jack cable.
  • Remove the 1 M2 x 3mm screw.
  • Remove the DC Jack.
Lift the motherboard & turn it over.Unplug the DC jack cable.Remove the 1 M2 x 3mm screw.Remove the DC Jack.
Vostro 3558 DC Jack

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Vostro 15 3558 DC Jack

Topics: Dell Vostro Repair Manuals Dell Laptop Repair Dell Repair Manuals DC Jack Vostro 15 (3558)

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.