Dell XPS 17 (9700) How-To Install & Replace Your Motherboard

By on July 6, 2023 · 8:08 pm
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the Motherboard on your XPS 17-9700 laptop. These installation instructions have been made into 15 easy to follow printable steps. We have also created a video tutorial that shows you how to install your XPS 17-9700 Motherboard.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x small Phillips head screwdriver
  • 1 x T5 Torx screwdriver
  • 1 x small plastic scribe
XPS 9700 Motherboard

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
XPS 17 9700 Motherboard

Video tutorial repair manual



Installation and Removal Instructions
XPS 17-9700 Motherboard

Before you begin: If you need help at any point, you can always contact Parts-People Motherboard Repair Department for help with your diagnosis or repair.

Step 1

Unscrew the Bottom Base Cover (8 x 2.5mm x 4mm T5 Torx screws).

Step 2

  • Unscrew the Bottom Base Cover (8 x 2.5mm x 4mm T5 Torx screws).
  • Use a plastic scribe to pry apart and remove the bottom base cover.
Unscrew the Bottom Base Cover (8 x 2.5mm x 4mm T5 Torx screws).Use a plastic scribe to pry apart and remove the bottom base cover. Unscrew the Bottom Base Cover (8 x 2.5mm x 4mm T5 Torx screws).
Unscrew the battery (7 x M2 x 4mm).

Step 3

Unscrew the battery (7 x M2 x 4mm).Disconnect and remove the Battery.Unscrew the battery (7 x M2 x 4mm).
Separate clips outwardly to release the RAM/Memory.

Step 4

  • Separate clips outwardly to release the RAM/Memory.
  • Slide out the RAM/Memory.
Separate clips outwardly to release the RAM/Memory.Slide out the RAM/Memory.
Unscrew and slide out the M.2 NVMe SSD (1 x

Step 5

Unscrew and slide out the M.2 NVMe SSD (1 x Unscrew and slide out the M.2 NVMe SSD (1 x
Unscrew and remove the Heatsink (4 x 2mm x 6.5mm).

Step 6

  • Unscrew and remove the Heatsink (4 x 2mm x 6.5mm).
Unscrew and remove the Heatsink (4 x 2mm x 6.5mm).Unscrew and remove the Heatsink (4 x 2mm x 6.5mm).
Unscrew and disconnect the Left Cooling Fan (2 x

Step 7

Unscrew and disconnect the Left Cooling Fan (2 x Unscrew and disconnect the Left Cooling Fan (2 x Unscrew and disconnect the Left Cooling Fan (2 x
Unscrew and disconnect the Right Cooling Fan (2 x

Step 8

Unscrew and disconnect the Right Cooling Fan (2 x Unscrew and disconnect the Right Cooling Fan (2 x Unscrew and disconnect the Right Cooling Fan (2 x
Unscrew and disconnect the SD/Audio IO Board (3 x

Step 9

Unscrew and disconnect the SD/Audio IO Board (3 x Unscrew and disconnect the SD/Audio IO Board (3 x
Unscrew and lift the LCD cable bracket (2 x M2 x 4mm).

Step 10

  • Unscrew and lift the LCD cable bracket (2 x M2 x 4mm).
  • Disconnect the LCD cables.
Unscrew and lift the LCD cable bracket (2 x M2 x 4mm).Disconnect the LCD cables.
Unscrew and remove the LCD Screen Assembly (6 x

Step 11

Unscrew and remove the LCD Screen Assembly (6 x Unscrew and remove the LCD Screen Assembly (6 x Unscrew and remove the LCD Screen Assembly (6 x Unscrew and remove the LCD Screen Assembly (6 x
Disconnect the motherboard cables. Use a plastic scribe to unclip them where shown.

Step 12

  • Disconnect the motherboard cables. Use a plastic scribe to unclip them where shown.
Disconnect the motherboard cables. Use a plastic scribe to unclip them where shown.Disconnect the motherboard cables. Use a plastic scribe to unclip them where shown.Disconnect the motherboard cables. Use a plastic scribe to unclip them where shown.Disconnect the motherboard cables. Use a plastic scribe to unclip them where shown.
Unclip and disconnect the remaining motherboard cable.

Step 13

  • Unclip and disconnect the remaining motherboard cable.
Unclip and disconnect the remaining motherboard cable.Unclip and disconnect the remaining motherboard cable.
Unscrew the WiFi bracket and disconnect the antenna cables (1 x M2 x 3mm).

Step 14

  • Unscrew the WiFi bracket and disconnect the antenna cables (1 x M2 x 3mm).
Unscrew the WiFi bracket and disconnect the antenna cables (1 x M2 x 3mm).Unscrew the WiFi bracket and disconnect the antenna cables (1 x M2 x 3mm).
Unscrew and remove the Motherboard (7 x

Step 15

  • Unscrew and remove the Motherboard (7 x M2 x 4mm).
  • ***FOLLOW THESE STEPS IN REVERSE TO REINSTALL YOUR PART.
Unscrew and remove the Motherboard (7 x ***FOLLOW THESE STEPS IN REVERSE TO REINSTALL YOUR PART.
XPS 9700 Motherboard

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
XPS 17 9700 Motherboard

Topics: Dell XPS Repair Manuals Dell Laptop Repair Dell Repair Manuals Motherboard XPS 17 (9700)

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.