Dell Inspiron 16 (7610) How-To Install & Replace Your Speakers

By Ricardo on July 10, 2023 · 6:20 pm

In this Dell laptop tutorial we are going to show you how to install and replace the Speakers on your Dell Inspiron 16 (7610) laptop. These installation instructions have been made into 10 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Dell Inspiron 16 (7610) Speakers.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

1 x small phillips head screwdriver
1 x small plastic scribe

Inspiron 16 7610 Speakers

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!

Use this coupon code to save 5% off these parts

DIYM514

Inspiron 16 7610 Speakers

Video tutorial repair manual

Installation and Removal Instructions
Dell Inspiron 16 (7610) Speakers

Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.

Step 1

Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.

Use a Phillips Screwdriver to unscrew the

Step 2

Use a Phillips Screwdriver to unscrew the Bottom Base Cover (7 x M2 x 4mm) (2 x captive screws).
Use a Plastic Scribe to pry apart and remove the Bottom Base Cover.

Step 3

Unscrew and disconnect the Battery (5 x M2 x 3mm).

Step 4

Unscrew the Left Cooling Fan (2 x M2 x 4mm).
Disconnect and remove the cooling fan.

Step 5

Unscrew the Right Cooling Fan (2 x M2 x 4mm).
Disconnect and remove the cooling fan.

Unscrew and remove the Heatsink (4 x captive screws).

Step 6

Unscrew and remove the Heatsink (4 x captive screws).

Unscrew and remove the WiFi bracket (1 x M2 x 3mm).

Step 7

Unscrew and remove the WiFi bracket (1 x M2 x 3mm).
Disconnect the antenna cables and slide out the WiFi Card.

Step 8

Disconnect the LCD cable.

Step 9

Unscrew the Motherboard (2 x M2 x 3mm) (2 x M2 x 5mm) (1 x M2 x 2mm).
Unclip each locking tabs (in the direction shown in the image) and disconnect the motherboard cables.