In this Dell laptop tutorial we are going to show you how to install and replace the Palmrest Touchpad Assembly on your Precision 3561 laptop. These installation instructions have been made into 16 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Precision 3561 Palmrest Touchpad Assembly.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x Phillips #0 screwdriver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Installation and Removal Instructions
Precision 3561 Palmrest Touchpad Assembly
Step 1
- Before you begin: If you need help at any point, you can always contact Parts-People Laptop Repair Department for help with your diagnosis or repair.
Step 2
- Use a Phillips Screwdriver to unscrew the Bottom Base (9 x captive screws).
- Use a Plastic Scribe to pry apart and remove the Bottom Base Cover.
Step 5
- ***IF YOUR MODEL HAS A 2.5'' SATA HARD DRIVE: Disconnect the hard drive connector.
- Unscrew and remove the Hard Drive or Hard Drive Filler (4 x M2 x 4mm).
Step 7
- Unscrew and remove the Wifi bracket (1 x captive screw).
- Disconnect the antenna cables.
- Slide out the WiFi Card.
Step 8
- Unscrew and remove the LCD cable bracket (2 x M2 x 3mm).
- Pull out the 1st LCD cable connector.
- Unsnap the locking clip and pull out the 2nd LCD cable connector.
- Pull out the 3rd LCD cable connector.
Step 11
- Disconnect and remove the CMOS battery.
Step 12
- Unclip the locking tabs and disconnect the motherboard cables.
Step 14
- Unclip the locking tabs and disconnect the keyboard cables.
Step 16
- The remaining piece is the Palmrest Touchpad Assembly.
- ***FOLLOW THESE STEPS IN REVERSE TO REINSTALL YOUR PART.
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|