Dell Precision 3561 How-To Install & Replace Your LCD Cable

By on January 23, 2024 · 10:48 am
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the LCD Cable on your Precision 3561 laptop. These installation instructions have been made into 11 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Precision 3561 LCD Cable.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x Phillips #0 screwdriver
  • 1 x small plastic scribe
Precision 3561 LCD Cable

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Precision 3561 LCD Cable

Video tutorial repair manual



Installation and Removal Instructions
Precision 3561 LCD Cable

Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.

Step 1

Use a Phillips Screwdriver to unscrew the

Step 2

Use a Phillips Screwdriver to unscrew the Use a Plastic Scribe to pry apart and remove the Bottom Base Cover.Use a Phillips Screwdriver to unscrew the
Disconnect the Battery.

Step 3

Disconnect the Battery.Disconnect the Battery.
Unscrew and remove the Wifi bracket (1 x captive screw).

Step 4

  • Unscrew and remove the Wifi bracket (1 x captive screw).
  • Disconnect the antenna cables.
  • Slide out the WiFi Card.
Unscrew and remove the Wifi bracket (1 x captive screw).Disconnect the antenna cables.Slide out the WiFi Card.
Unscrew and remove the LCD cable bracket.

Step 5

  • Unscrew and remove the LCD cable bracket.
  • Pull out the 1st LCD cable connector.
  • Unsnap the locking clip and pull out the 2nd LCD cable connector.
  • Pull out the 3rd LCD cable connector.
Unscrew and remove the LCD cable bracket.Pull out the 1st LCD cable connector.Unsnap the locking clip and pull out the 2nd LCD cable connector.Pull out the 3rd LCD cable connector.
Unscrew the hinges and then open up the LCD assembly (6 x M2.5 x 5mm).

Step 6

  • Unscrew the hinges and then open up the LCD assembly (6 x M2.5 x 5mm).
  • Separate the LCD assembly from the Palmrest.
Unscrew the hinges and then open up the LCD assembly (6 x M2.5 x 5mm).Separate the LCD assembly from the Palmrest.Unscrew the hinges and then open up the LCD assembly (6 x M2.5 x 5mm).Unscrew the hinges and then open up the LCD assembly (6 x M2.5 x 5mm).
Insert a plastic scribe into the hinge cover openings and separate the LCD Bezel from the

Step 7

  • Insert a plastic scribe into the hinge cover openings and separate the LCD Bezel from the LCD Back Cover.
  • Carefully work your way around unsnapping it until it's fully detached.
Insert a plastic scribe into the hinge cover openings and separate the LCD Bezel from the Carefully work your way around unsnapping it until it's fully detached.Insert a plastic scribe into the hinge cover openings and separate the LCD Bezel from the
Unscrew and turn over the LCD Screen (6 X 2.5mm x 3.5mm).

Step 8

  • Unscrew and turn over the LCD Screen (6 X 2.5mm x 3.5mm).
Unscrew and turn over the LCD Screen (6 X 2.5mm x 3.5mm).Unscrew and turn over the LCD Screen (6 X 2.5mm x 3.5mm).Unscrew and turn over the LCD Screen (6 X 2.5mm x 3.5mm).Unscrew and turn over the LCD Screen (6 X 2.5mm x 3.5mm).
Peel away the tape covering the LCD connector on the back of the screen.

Step 9

  • Peel away the tape covering the LCD connector on the back of the screen.
  • Unsnap the locking clip and disconnect the LCD Cable.
Peel away the tape covering the LCD connector on the back of the screen.Unsnap the locking clip and disconnect the LCD Cable.Peel away the tape covering the LCD connector on the back of the screen.
Unsnap the locking clip and disconnect the web camera cable.

Step 10

  • Unsnap the locking clip and disconnect the web camera cable.
Unsnap the locking clip and disconnect the web camera cable.Unsnap the locking clip and disconnect the web camera cable.
Remove the LCD cable.

Step 11

  • Remove the LCD cable.
Remove the LCD cable.Remove the LCD cable.
Precision 3561 LCD Cable

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Precision 3561 LCD Cable

Topics: Dell Precision Repair Manuals Dell Laptop Repair Dell Repair Manuals LCD Cable Precision 3561

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.