In this Dell laptop tutorial we are going to show you how to install and replace the LCD Display Assembly on your Alienware x15 R1 laptop. These installation instructions have been made into 9 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Alienware x15 R1 LCD Display Assembly.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x Phillips #1 screwdriver
- 1 x small plastic scribe
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Alienware x15 R1 LCD Display Assembly
Step 1
- Before you begin: If you need help at any point, you can always contact Parts-People Laptop Repair Department for help with your diagnosis or repair.
Step 2
- Use a Phillips Screwdriver to loosen the Bottom Base Cover screws (4 x M2.5 x 7mm) (2 x captive screws).
- Use a Plastic Scribe to pry apart and remove the Bottom Base Cover.
Step 3
- To protect your laptop from static discharge, disconnect the Battery.
Step 4
- Unclip the locking tab to release the rear I/O cover cable.
- Disconnect the rear I/O cover cable.
Step 5
- Unclip the locking tab to release the rear I/O cover cable.
- Disconnect the rear I/O cover cable.
Step 6
- Unscrew and slide off the rear I/O cover (2 x 2.5mm x 9mm).
Step 7
- Disconnect the left LCD cables.
Step 8
- Peel off the protective tape.
- Unclip the locking tab.
- Disconnect the right LCD cable.
Step 9
- Unscrew and remove the LCD Display Assembly (6 x 2.5mm x 3.5mm).
- ***THE REINSTALLATION PROCESS IS AS SIMPLE AS FOLLOWING THESE STEPS IN REVERSE.
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|