Dell XPS 13 (9315) How-To Install & Replace Your Motherboard

By on April 16, 2024 · 7:53 pm
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the Motherboard on your XPS 13 (9315) laptop. These installation instructions have been made into 18 easy to follow printable steps. We have also created a video tutorial that shows you how to install your XPS 13 (9315) Motherboard.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x Torx #5 screwdriver
  • 1 x Phillips #0 screwdriver
  • 1 x small plastic scribe
XPS 9315 Motherboard

Dell Laptop Replacement Parts Needed

TDK33 Image
Eligible for $5.00 Economy Shipping.
Only 1 left in stock - order soon.
7PJ1T Image
Eligible for $5.00 Economy Shipping.
Only 1 left in stock - order soon.
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
XPS 13 9315 Motherboard

Video tutorial repair manual



Installation and Removal Instructions
XPS 13 (9315) Motherboard

Before you begin: If you need help at any point, you can always contact Parts-People Motherboard Repair Department for help with your diagnosis or repair.

Step 1

Unscrew and remove the Bottom Base Cover (8 x

Step 2

Unscrew and remove the Bottom Base Cover (8 x Unscrew and remove the Bottom Base Cover (8 x Unscrew and remove the Bottom Base Cover (8 x Unscrew and remove the Bottom Base Cover (8 x
Disconnect the battery cable.

Step 3

  • Disconnect the battery cable.
Unscrew and remove the Battery (8 x

Step 4

Unscrew and remove the Battery (8 x Unscrew and remove the Battery (8 x
Unscrew and remove the LCD connector from the interposer board (2 x M1.6 x 3.5mm) .

Step 5

  • Unscrew and remove the LCD connector from the interposer board (2 x M1.6 x 3.5mm) .
Unscrew and remove the LCD connector from the interposer board (2 x M1.6 x 3.5mm) .Unscrew and remove the LCD connector from the interposer board (2 x M1.6 x 3.5mm) .
Unscrew the 2 LCD cable brackets (4 x 1.6mm x 2.3mm).

Step 6

  • Unscrew the 2 LCD cable brackets (4 x 1.6mm x 2.3mm).
Unscrew and lift the left LCD hinge (3 x 2.5mm x 4.3mm) (1 x 1.6mm x 3mm) (1 x M1.6 x 2.5mm).

Step 7

  • Unscrew and lift the left LCD hinge (3 x 2.5mm x 4.3mm) (1 x 1.6mm x 3mm) (1 x M1.6 x 2.5mm).
Unscrew and lift the left LCD hinge (3 x 2.5mm x 4.3mm) (1 x 1.6mm x 3mm) (1 x M1.6 x 2.5mm).Unscrew and lift the left LCD hinge (3 x 2.5mm x 4.3mm) (1 x 1.6mm x 3mm) (1 x M1.6 x 2.5mm).
Unscrew and lift the right LCD hinge (3 x 2.5mm x 4.3mm) (1 x 1.6mm x 3mm) (1 x M1.6 x 2.5mm).

Step 8

  • Unscrew and lift the right LCD hinge (3 x 2.5mm x 4.3mm) (1 x 1.6mm x 3mm) (1 x M1.6 x 2.5mm).
Unscrew and lift the right LCD hinge (3 x 2.5mm x 4.3mm) (1 x 1.6mm x 3mm) (1 x M1.6 x 2.5mm).Unscrew and lift the right LCD hinge (3 x 2.5mm x 4.3mm) (1 x 1.6mm x 3mm) (1 x M1.6 x 2.5mm).
Separate the LCD Display Assembly from the palmrest.

Step 9

Separate the LCD Display Assembly from the palmrest.Separate the LCD Display Assembly from the palmrest.
Unsnap the locking tab and then disconnect the touchpad cable.

Step 10

  • Unsnap the locking tab and then disconnect the touchpad cable.
Unsnap the locking tab and then disconnect the touchpad cable.Unsnap the locking tab and then disconnect the touchpad cable.
Disconnect the I/O board cable from the motherboard lifting from the outside of the connector.

Step 11

  • Disconnect the I/O board cable from the motherboard lifting from the outside of the connector.
Disconnect the I/O board cable from the motherboard lifting from the outside of the connector.Disconnect the I/O board cable from the motherboard lifting from the outside of the connector.
Unsnap the locking tab and disconnect the cooling fan cable.

Step 12

  • Unsnap the locking tab and disconnect the cooling fan cable.
Unsnap the locking tab and disconnect the cooling fan cable.Unsnap the locking tab and disconnect the cooling fan cable.
Unscrew and remove the Heatsink (4 x

Step 13

Unscrew and remove the Heatsink (4 x Unscrew and remove the Heatsink (4 x
Unscrew and remove the WiFi bracket (1 x 1.6mm x 2.3mm).

Step 14

  • Unscrew and remove the WiFi bracket (1 x 1.6mm x 2.3mm).
  • Disconnect the WiFi antenna cables.
Unscrew and remove the WiFi bracket (1 x 1.6mm x 2.3mm).Disconnect the WiFi antenna cables.
Unscrew and then disconnect the I/O circuit board (1 x 1.6mm x 2.8mm).

Step 15

  • Unscrew and then disconnect the I/O circuit board (1 x 1.6mm x 2.8mm).
Unscrew and then disconnect the I/O circuit board (1 x 1.6mm x 2.8mm).Unscrew and then disconnect the I/O circuit board (1 x 1.6mm x 2.8mm).
Unscrew and remove the Motherboard (5 x 1.6mm x 1.5mm).

Step 16

  • Unscrew and remove the Motherboard (5 x 1.6mm x 1.5mm).
Unscrew and remove the Motherboard (5 x 1.6mm x 1.5mm).Unscrew and remove the Motherboard (5 x 1.6mm x 1.5mm).
BEFORE REINSTALLING YOUR HEATSINK: Wipe away any old thermal paste from the CPU and heatsink. You can use a clean, dry paper towel. Avoid making contact with your fingers as the oil from your skin can reduce the heat transfer capability of the thermal paste.

Step 17

  • BEFORE REINSTALLING YOUR HEATSINK: Wipe away any old thermal paste from the CPU and heatsink. You can use a clean, dry paper towel. Avoid making contact with your fingers as the oil from your skin can reduce the heat transfer capability of the thermal paste.
BEFORE REINSTALLING YOUR HEATSINK: Wipe away any old thermal paste from the CPU and heatsink. You can use a clean, dry paper towel. Avoid making contact with your fingers as the oil from your skin can reduce the heat transfer capability of the thermal paste.BEFORE REINSTALLING YOUR HEATSINK: Wipe away any old thermal paste from the CPU and heatsink. You can use a clean, dry paper towel. Avoid making contact with your fingers as the oil from your skin can reduce the heat transfer capability of the thermal paste.
Then apply a small amount of thermal paste to the CPU chips.

Step 18

  • Then apply a small amount of thermal paste to the CPU chips.
  • You can optionally spread the thermal paste evenly across the CPU using a clean, flat surface.
  • ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
Then apply a small amount of thermal paste to the CPU chips.You can optionally spread the thermal paste evenly across the CPU using a clean, flat surface.***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.Then apply a small amount of thermal paste to the CPU chips.
XPS 9315 Motherboard

Dell Laptop Replacement Parts Needed

TDK33 Image
Eligible for $5.00 Economy Shipping.
Only 1 left in stock - order soon.
7PJ1T Image
Eligible for $5.00 Economy Shipping.
Only 1 left in stock - order soon.
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
XPS 13 9315 Motherboard

Topics: Dell XPS Repair Manuals Dell Laptop Repair Dell Repair Manuals Motherboard XPS 13 (9315)

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.