In this Dell laptop tutorial we are going to show you how to install and replace the LCD Cable on your Latitude 5430 laptop. These installation instructions have been made into 10 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Latitude 5430 LCD Cable.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x Phillips #0 screwdriver
- 1 x small plastic scribe
Latitude 5430 LCD Cable
Latitude 5430 LCD Cable
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Latitude 5430 LCD Cable
Step 1
- Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.
Step 2
- Unscrew the Bottom Base Cover (8 x captive screws).
- Use a plastic scribe to pry apart and remove the Bottom Base Cover.
Step 3
- Disconnect the battery cable.
Step 4
- Unscrew and remove the WiFi bracket (1 x 2mm x 2.5mm).
- Disconnect the WiFi antennas.
- Slide out the WiFi Card.
Step 7
- Use a plastic scribe to separate and remove the the LCD bezel.
Step 8
- Disconnect the web camera.
Step 10
- Peel away the adhesive covering.
- Unclip the locking tab and disconnect the LCD cable.
Latitude 5430 LCD Cable
Latitude 5430 LCD Cable
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|