In this Dell laptop tutorial we are going to show you how to install and replace the Smart Card Reader on your Latitude 5430 laptop. These installation instructions have been made into 13 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Latitude 5430 Smart Card Reader.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x Phillips #0 screwdriver
- 1 x small plastic scribe
Latitude 5430 Smart Card Reader
Latitude 5430 Smart Card Reader
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Latitude 5430 Smart Card Reader
Step 1
- Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.
Step 2
- Unscrew the Bottom Base Cover (8 x captive screws).
- Use a plastic scribe to pry apart and remove the Bottom Base Cover.
Step 3
- Disconnect the battery cable.
Step 7
- Unscrew and remove the WiFi bracket (1 x 2mm x 2.5mm).
- Disconnect the WiFi antennas.
- Slide out the WiFi Card.
Step 8
- Disconnect the Speakers.
Step 10
- Unclip the locking tabs and disconnect the keyboard cables.
Step 11
- Unclip the locking tab and disconnect the touchpad cable.
Step 12
- Unclip the locking tab and disconnect the Smart Card Reader cable.
Step 13
- Unscrew and remove the Smart Card Reader (3 x 2mm x 2.5mm).
Latitude 5430 Smart Card Reader
Latitude 5430 Smart Card Reader
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|