Dell Latitude 7300 How-To Install & Replace Your Keyboard

By on July 2, 2024 · 8:44 pm
PrintEmail

In this Dell laptop tutorial we are going to show you how to install and replace the Keyboard on your Latitude 7300 laptop. These installation instructions have been made into 19 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Latitude 7300 Keyboard.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x Phillips #0 screwdriver
  • 1 x small plastic scribe
Latitude 7300 Keyboard

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude 7300 Keyboard

Video tutorial repair manual



Installation and Removal Instructions
Latitude 7300 Keyboard

Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.

Step 1

Unscrew the Bottom Base Cover (8 x captive screws).

Step 2

  • Unscrew the Bottom Base Cover (8 x captive screws).
  • Use a plastic scribe to pry apart and remove the Bottom Base Cover.
Unscrew the Bottom Base Cover (8 x captive screws).Use a plastic scribe to pry apart and remove the Bottom Base Cover.Unscrew the Bottom Base Cover (8 x captive screws).Unscrew the Bottom Base Cover (8 x captive screws).
Disconnect the Battery cable.

Step 3

Disconnect the Battery cable.Disconnect the Battery cable.
Disconnect the CMOS Battery.

Step 4

  • Disconnect the CMOS Battery.
Disconnect the CMOS Battery.Disconnect the CMOS Battery.
Disconnect the Speakers.

Step 5

  • Disconnect the Speakers.
Disconnect the Speakers.Disconnect the Speakers.
Unscrew and remove the Battery (1 x captive screw).

Step 6

  • Unscrew and remove the Battery (1 x captive screw).
Unscrew and remove the Battery (1 x captive screw).Unscrew and remove the Battery (1 x captive screw).
Pull the locking tabs outwardly to release the RAM/Memory.

Step 7

  • Pull the locking tabs outwardly to release the RAM/Memory.
  • Slide out the RAM/Memory.
Pull the locking tabs outwardly to release the RAM/Memory.Slide out the RAM/Memory.Pull the locking tabs outwardly to release the RAM/Memory.
Unscrew and remove the SSD bracket (3 x captive screws).

Step 8

  • Unscrew and remove the SSD bracket (3 x captive screws).
  • Slide out the M.2 NVMe SSD.
Unscrew and remove the SSD bracket (3 x captive screws).Slide out the M.2 NVMe SSD.Unscrew and remove the SSD bracket (3 x captive screws).
Unscrew and remove the WiFi bracket (1 x M2 x 3mm).

Step 9

  • Unscrew and remove the WiFi bracket (1 x M2 x 3mm).
  • Disconnect the antenna cables.
  • Slide out the WiFi Card.
Unscrew and remove the WiFi bracket (1 x M2 x 3mm).Disconnect the antenna cables.Slide out the WiFi Card.
Unscrew and remove the LCD cable bracket (1 x 2mm x 2.5mm).

Step 10

  • Unscrew and remove the LCD cable bracket (1 x 2mm x 2.5mm).
  • Disconnect the LCD cables.
Unscrew and remove the LCD cable bracket (1 x 2mm x 2.5mm).Disconnect the LCD cables.Unscrew and remove the LCD cable bracket (1 x 2mm x 2.5mm).Unscrew and remove the LCD cable bracket (1 x 2mm x 2.5mm).
Unscrew and remove the WWAN cable brackets (2 x M2 x 3mm).

Step 11

  • Unscrew and remove the WWAN cable brackets (2 x M2 x 3mm).
Unscrew and remove the WWAN cable brackets (2 x M2 x 3mm).Unscrew and remove the WWAN cable brackets (2 x M2 x 3mm).
Unscrew and remove the DC Jack bracket (1 x M2 x 3mm).

Step 12

Unscrew and remove the DC Jack bracket (1 x M2 x 3mm).Disconnect the DC Jack Charging Port.Unscrew and remove the DC Jack bracket (1 x M2 x 3mm).
Unsnap the locking tab and disconnect the LED cable.

Step 13

  • Unsnap the locking tab and disconnect the LED cable.
Unsnap the locking tab and disconnect the LED cable.Unsnap the locking tab and disconnect the LED cable.
Unsnap the locking tab and disconnect the touchpad cable.

Step 14

  • Unsnap the locking tab and disconnect the touchpad cable.
Unsnap the locking tab and disconnect the touchpad cable.Unsnap the locking tab and disconnect the touchpad cable.
Unscrew the Cooling Fan (2 x

Step 15

Unscrew and remove the Motherboard (8 x

Step 16

Unscrew and remove the Motherboard (8 x Unscrew and remove the Motherboard (8 x Unscrew and remove the Motherboard (8 x
Unsnap the locking tabs and disconnect the keyboard cables.

Step 17

  • Unsnap the locking tabs and disconnect the keyboard cables.
Unsnap the locking tabs and disconnect the keyboard cables.Unsnap the locking tabs and disconnect the keyboard cables.Unsnap the locking tabs and disconnect the keyboard cables.Unsnap the locking tabs and disconnect the keyboard cables.
Unscrew and remove the keyboard and keyboard bracket (19 x 1.6mm x 2mm).

Step 18

  • Unscrew and remove the keyboard and keyboard bracket (19 x 1.6mm x 2mm).
Unscrew and remove the keyboard and keyboard bracket (19 x 1.6mm x 2mm).Unscrew and remove the keyboard and keyboard bracket (19 x 1.6mm x 2mm).
Unscrew and remove the Keyboard (2 x

Step 19

  • Unscrew and remove the Keyboard (2 x M2 x 2mm).
  • ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
Unscrew and remove the Keyboard (2 x ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.Unscrew and remove the Keyboard (2 x
Latitude 7300 Keyboard

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude 7300 Keyboard

Topics: Dell Latitude Repair Manuals Dell Laptop Repair Dell Repair Manuals Keyboard Latitude 7300

Tags

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.