Dell Latitude 7410 2-In-1 How-To Install & Replace Your I/O Circuit Board


In this Dell laptop tutorial we are going to show you how to install and replace the I/O Circuit Board on your Latitude 7410 2-In-1 laptop. These installation instructions have been made into 7 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Latitude 7410 2-In-1 I/O Circuit Board.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

  • 1 x Phillips #0 screwdriver
  • 1 x small plastic scribe
Latitude 7410 2-in-1 I O Circuit Board

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude 7410 2-in-1 I O Circuit Board

Video tutorial repair manual



Installation and Removal Instructions
Latitude 7410 2-In-1 I/O Circuit Board

Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.

Step 1

Unscrew the Bottom Base Cover (8 x captive screws).

Step 2

  • Unscrew the Bottom Base Cover (8 x captive screws).
  • Use a plastic scribe to pry apart and remove the Bottom Base Cover.
Unscrew the Bottom Base Cover (8 x captive screws).Use a plastic scribe to pry apart and remove the Bottom Base Cover.Unscrew the Bottom Base Cover (8 x captive screws).Unscrew the Bottom Base Cover (8 x captive screws).
Disconnect the battery cable.

Step 3

  • Disconnect the battery cable.
Disconnect the battery cable.Disconnect the battery cable.
Unscrew and disconnect the F-Beam from the I/O Circuit Board (1 x M2 x 2mm).

Step 4

  • Unscrew and disconnect the F-Beam from the I/O Circuit Board (1 x M2 x 2mm).
Unscrew and disconnect the F-Beam from the I/O Circuit Board (1 x M2 x 2mm).Unscrew and disconnect the F-Beam from the I/O Circuit Board (1 x M2 x 2mm).
Unscrew the Cooling Fan (2 x 2mm x 2.5mm).

Step 5

Disconnect the speaker cable.

Step 6

  • Disconnect the speaker cable.
Unscrew and remove I/O Circuit Board (1mm x 3.5mm) (1 x 2mm x 2.5mm).

Step 7

Unscrew and remove I/O Circuit Board (1mm x 3.5mm) (1 x 2mm x 2.5mm).Unscrew and remove I/O Circuit Board (1mm x 3.5mm) (1 x 2mm x 2.5mm).Unscrew and remove I/O Circuit Board (1mm x 3.5mm) (1 x 2mm x 2.5mm).
Latitude 7410 2-in-1 I O Circuit Board

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts
DIYM514
Latitude 7410 2-in-1 I O Circuit Board

Topics: Dell Latitude Repair Manuals Dell Laptop Repair Dell Repair Manuals I/O Circuit Board Latitude 7410 2-In-1

Join the conversation!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.