Dell Latitude 7410 2-In-1 How-To Install & Replace Your Heatsink Cooling Fan

By Ricardo on July 18, 2024 · 5:38 pm

In this Dell laptop tutorial we are going to show you how to install and replace the Heatsink Cooling Fan on your Latitude 7410 2-in-1 laptop. These installation instructions have been made into 9 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Latitude 7410 2-in-1 Heatsink Cooling Fan.

Before you begin

Please take the time read the following safety guidelines when working on static sensitive electrical components.
Dell repair manual service precautions

Tools needed for this laptop repair

1 x Phillips #0 screwdriver
1 x small plastic scribe

Latitude 7410 2-in-1 Heatsink Fan

Dell Laptop Replacement Parts Needed

DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!

Use this coupon code to save 5% off these parts

DIYM514

Latitude 7410 2-in-1 Heatsink Cooling Fan

Video tutorial repair manual

Installation and Removal Instructions
Latitude 7410 2-in-1 Heatsink Cooling Fan

Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.

Step 1

Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.

Unscrew the Bottom Base Cover (8 x captive screws).

Step 2

Unscrew the Bottom Base Cover (8 x captive screws).
Use a plastic scribe to pry apart and remove the Bottom Base Cover.

Step 3

Disconnect the battery cable.

Step 4

Remove the heat shield.

Unscrew the Cooling Fan (2 x 2mm x 2.5mm).

Step 5

Unscrew the Cooling Fan (2 x 2mm x 2.5mm).

Step 6

Disconnect the cooling fan cable.

Unscrew and remove the Heatsink (4 x 2mm x 2.5mm).

Step 7

Unscrew and remove the Heatsink (4 x 2mm x 2.5mm).

BEFORE REPLACING HEATSINK: Wipe away any old thermal paste from the CPU and heatsink.

Step 8

BEFORE REPLACING HEATSINK: Wipe away any old thermal paste from the CPU and heatsink.
***NOTE: Make sure to not touch the heat transfer areas on the heatsink and processors. The oils on your skin can reduce the heat transfer capability of the thermal paste.