In this Dell laptop tutorial we are going to show you how to install and replace the I/O Circuit Board on your Latitude 7310 laptop. These installation instructions have been made into 7 easy to follow printable steps. We have also created a video tutorial that shows you how to install your Latitude 7310 I/O Circuit Board.
Before you begin
Dell repair manual service precautions
Tools needed for this laptop repair
- 1 x Phillips #0 screwdriver
- 1 x small plastic scribe
Latitude 7310 I O Circuit Board
Latitude 7310 I O Circuit Board
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|
Video tutorial repair manual
Installation and Removal Instructions
Latitude 7310 I/O Circuit Board
![Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.](https://www.parts-people.com/blog/wp-content/uploads/2023/10/Alienwarem16-LAPTOP-SERVICE-BLOG-THUMBNAIL-300x169.jpg)
![Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.](https://www.parts-people.com/blog/wp-content/uploads/2023/10/Alienwarem16-LAPTOP-SERVICE-BLOG-THUMBNAIL-300x169.jpg)
Step 1
- Before you begin: If you need help at any point, you can always contact Parts-People Repair Department for help with your diagnosis or repair.
![Unscrew the Bottom Base Cover (8 x captive screws).](https://www.parts-people.com/blog/wp-content/uploads/2024/06/Tools-1-Screwdriver-0-300x169.jpg)
![Unscrew the Bottom Base Cover (8 x captive screws).](https://www.parts-people.com/blog/wp-content/uploads/2024/06/Tools-1-Screwdriver-0-300x169.jpg)
Step 2
- Unscrew the Bottom Base Cover (8 x captive screws).
- Use a plastic scribe to pry apart and remove the Bottom Base Cover.
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![Disconnect the battery cable.](https://www.parts-people.com/blog/wp-content/uploads/2024/06/7410-battery1-300x169.jpg)
![Disconnect the battery cable.](https://www.parts-people.com/blog/wp-content/uploads/2024/06/7410-battery1-300x169.jpg)
Step 3
- Disconnect the battery cable.
![]() ![]() ![]() ![]() |
![Unscrew the Cooling Fan (2 x 2mm x 2.5mm).](https://www.parts-people.com/blog/wp-content/uploads/2024/06/7410-fan1-300x169.jpg)
![Unscrew the Cooling Fan (2 x 2mm x 2.5mm).](https://www.parts-people.com/blog/wp-content/uploads/2024/06/7410-fan1-300x169.jpg)
Step 5
- Unscrew the Cooling Fan (2 x 2mm x 2.5mm).
![Disconnect the speaker cable.](https://www.parts-people.com/blog/wp-content/uploads/2024/06/7410-speakers1-1-300x169.jpg)
![Disconnect the speaker cable.](https://www.parts-people.com/blog/wp-content/uploads/2024/06/7410-speakers1-1-300x169.jpg)
Step 6
- Disconnect the speaker cable.
![Unscrew and remove I/O Circuit Board (1mm x 3.5mm) (1 x 2mm x 2.5mm).](https://www.parts-people.com/blog/wp-content/uploads/2024/06/7410-ioboard1-300x169.jpg)
![Unscrew and remove I/O Circuit Board (1mm x 3.5mm) (1 x 2mm x 2.5mm).](https://www.parts-people.com/blog/wp-content/uploads/2024/06/7410-ioboard1-300x169.jpg)
Step 7
- Unscrew and remove I/O Circuit Board (1mm x 3.5mm) (1 x 2mm x 2.5mm).
- ***FOLLOW THE ORIGINAL STEPS IN REVERSE TO REASSEMBLE YOUR LAPTOP.
![]() ![]() ![]() ![]() ![]() ![]() |
Latitude 7310 I O Circuit Board
Latitude 7310 I O Circuit Board
|
DIY Discount - Parts-People.com offers 5% off to all DO-IT-YOURSELFERS!
Use this coupon code to save 5% off these parts DIYM514
|